| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
BGD 570/571 ASTM D903 ISO 178 Universal Material Tensile Machine Universal Steel Tensile Testing Device
Description:
BGD 570/571 Universal Material Tensile Machine is a new type of material machine which combines the electronic technology and mechanical transmission. It has wide accuracy acceleration and test force range,not only measuring and controlling the load and displacement in higher accuracy and sensitively,but also doing the control test by automatically of isokinetic load and displacement. It operates easily and conveniently,especially applied in inspect instruments which is used for controlling products of produce line. This series of tensile machine is mainly suit for non-metal and metal test with test load less than 20KN(BGD 570)or 50KN(BGD 571).
The electronic universal material testing machine is mainly suitable for testing metal and non-metal materials,such as rubber,plastic,wire and cable,optical fiber cable,seat belt,safety belt,leather belt composite material,PVC,waterproof coiled material, steel pipe,copper material,section bar, spring steel,bearing steel,stainless steel (and other high hardness steels),castings,steel plates, steel belts and non-ferrous metal wires. To test their functions which include stretching,compression, bending,shearing,stripping,tearing,two-point extension(additional extension meter is required) etc.
Standard:
ISO 527, ISO 604, ISO 178, ISO 1209, ASTM D 638, ASTM D 903
Feature:
* High precision sensor(use high precision ball screw as driving mechanism)
* Frequency of collecting data:200 times/second
* Can store many testing results of referenced points, calculate average value automatically, grab automatically max. value, force value at break.
* Set range of break point proportion:0~99% ,and can set freely according to different samples, accomplish stopped status at different position.
* Safety Device:Over loading, Emergency shut down, limitation device for above travel and under travel.
* Collect date synchronously, conversable full 24 bits AD codes,, resolution arrives 1/500,000, surpass all competitors.
* More than one thousand clamps and grippers for selection.
* Support multi-sensors, can equip with a few sensors at the same time for different range.
* User can calculate elastic modulus,yield point,constant residual strength,constant elongation, constant force deformation and maximum strength. There are other special professional calculations, such as the calculation of belt stripping and the elongation at yield point.
* Optional measure and control system of professional test machine,which can realize the closed loop of force value,deformation and position,so that the tensile machine can carry out curve control tests freely,such as low frequency cycle(fatigue)test,step test and force value holding(creep)test.
Accessories:
BBGD 570/K---Low temperature tensile test chamber
BGD 1530---Bond strength pulling head (40mm×40mm)
BGD 1531---Bond strength pulling head (50mm×50mm)
BGD 1550/B---Elongation Device(Also call big deformation device, measure breaking elongation,see NOTE)
BGD 1551---Tensile small range sensor(≤ 500KG)
BGD 1552---Tensile big range senso(≥ 500KG)
BGD 1553---Pneumatic Cutting Machine(Used to cut different type samples)
BGD 1554---Cutter for dumb-bell sample(For tensile strength)
BGD 1555---Cutter for right angle tear sample(For tear strength)
BGD 1700---Plane clamp
BGD 1701---Eccentric wheel clamp
BGD 1702---Wedge clamp for metal
BGD 1703---Wedge clamp for hard plastic
BGD 1704---Film clamp
BGD 570/571 ASTM D903 ISO 178 Universal Material Tensile Machine Universal Steel Tensile Testing Device
| Ordering Information → Technical Parameters ↓ |
BGD 570 Universal Material Tensile Machine |
BGD 571 Universal Material Tensile Machine |
| Max. Range (optional) | 100N,200N,500N,1KN,2KN, 5KN,10KN,(can be extended to 20KN) | 50N,500N,5KN,10KN,20KN,50KN |
| Precision Grade | Grade 1 | |
| Measuring Range of Test Force |
1%~100% FS(full range) | |
| Display Error of Test Force | Within ±1% (indicating value) / Within ±0.5% (indicating value) |
|
| Resolution of Test Force | ±1/500000 of max. force (There is no grade in the whole process, and keep the constant resolution throughout the whole process.) | |
| Load Sensor | Standard configured one tension and pressure sensor (maximum load); Up to 5 sensors can be added. |
|
| Valid Test Width | 380mm | 450mm (can be widened as required) |
| Valid Tensile Space (excludes clamp) | 1100mm (can be lengthen as required) |
1000mm (can be lengthen as required) |
| Test Speed | 0.001~500 mm/min | 0.001~400 mm/min |
| Display Error of Displacement | Within ±0.5%(Indicating Value) / Within ±0.2%(Indicating Value) | |
| Control System of Deformation (Optional) |
A.Large deformation measure system:the minimum gauge distance is 10mm, the deformation range is 800mm. B.Small deformation measure system:gauge distance:25mm,50mm, 100mm; deformation range:5mm,10mm,25mm |
|
| Control Accuracy of Deformation Speed | Within ±0.5% of indicating value (large deformation or small deformation can be selected by customers) | |
| Safety Device | Electronic limit protection | |
| Lifting Device of Working Platform | Fast/slow speed automatic control, can move by yourself | |
| Return Function | Manual or automatic. After the test is completed,it returns to the initial position at the highest speed. | |
| Overload Protection | If the maximum load exceeds 10%,the machine will be automatically stopped. | |
| Clamp | A set of clamp (special clamps can also be designed according to the customers' sample specifications. | |
| Overall Size | 700 x 530mx 2200mm (L x W x D) | 880mx 530x 1800mm (L x W x D) |
| Power System | Servo machine + ZNT high accuracy ball screw | Servo machine + transmission + high accuracy ball screw |
| Power Supply | 220V, 50HZ | |
| Power | 0.4 KW | 1.0 KW |
| Weight | 300 KG | 380 KG |
){kind=link}