LS-G001 Infrared Feed Moisture Detector High Accuracy Analyzer Moisture instrument

• Customization: Available
• After-sales Service: online
• Warranty: 1 Year
• Model NO.: LS-G001
• Voltage: 220V
• weight: 25.000 KG
• Response Time: 0-60 seconds
• Height Range: 250mm ±100mm
• Transport Package: Plywood
• Specification: 56X36X30 cm
• Trademark: LANGSHUO
• Origin: Changsha
• HS Code: 9024800000
• Production Capacity: 200

Product Description

 LS-G001 Infrared Feed Moisture Detector High Accuracy Analyzer  Moisture instrument

Product Description

 

Working Principle

1.The hydrogen-oxygen bonds in water molecules absorb specific wavelengths of near-infrared light. At specific wavelengths, the energy of the near-infrared light reflected back is inversely proportional to the energy absorbed by the water molecules in the material. The moisture content of the material is calculated based on the amount of energy loss.

2.When water molecules are excited by specific energy bands, they become vibrationally excited. In the near-infrared spectrum, this band is particularly strong for water molecules, and it is easier for the instrument to emit, filter, and receive energy.

3.Near-infrared measurement technology is a non-destructive, non-contact real-time measurement technology

Structural Features

• Uses a single-sensor five-wavelength detection method, which significantly improves stability compared to six or eight beam methods.
• Five wavelengths provide more reference wavelengths for measurement, enhancing stability and accuracy.
• The average testing accuracy can reach approximately 0.1%-0.5% (depending on the material being measured), meeting production process requirements.
• Achieves online dynamic real-time detection with a response time of only 8ms, enabling real-time control of product moisture content.
• Highly integrated electronic components and SMT (Surface-Mount Technology) circuit boards result in low failure rates and stable quality.
• The filter is smaller than traditional designs, being less affected by bandwidth.
• Uses a single lead sulfide sensor, avoiding the issue of different linearities between dual sensors.
• Features a dynamic real-time diagnostic system that requires no regular maintenance.
• Offers multiple output signal options, including RS485, 4-20mA analog signals, and USB connections.

Functional Features

• Non-contact measurement using infrared technology to determine moisture content by diffuse reflection.
• Multi-channel setup: The LSD-MK series moisture meter has 50 channels, numbered from 1 to 50. Each channel number represents a set of channel parameters. Changing the channel number selects different parameters to adapt to the measurement of different types of materials with the same instrument.
• Basically unaffected by external light changes, with automatic temperature compensation that is largely unaffected by external temperature variations, ensuring long-term stability.
• Simple installation and convenient operation, with no impact on normal production during installation and commissioning. The LSD-MK series moisture meter uses pre-set calibration, and on-site calibration only requires adjusting the intercept (zero point) to complete the process.

Product Parameters

LS-G001 Infrared Feed Moisture Detector High Accuracy Analyzer  Moisture instrument
Technical Specification

Specification	Details
Measurement Range	0-50% (maximum when material is saturated with water)
Static Accuracy	±0.1%
Measurement Accuracy	±0.2% (errors may occur with changes in material composition)
Measurement Channels	50
Height Range	250mm ±100mm
Operating Temperature	0-50°C
Operating Humidity	5-90%
Repeatability	0.1%
Response Time	0-60 seconds
Filter Range	0-2.5%
Power Supply	AC 110-240V 50Hz/60Hz
Power Consumption	150W
Light Interference	Not affected by changes in external light and no need for a hood over the probe
Temperature Influence	With automatic temperature offset function, it is basically not affected by changes in external temperature

 

Detailed Photos