ISO 9227 IEC 60068 Briny Fog Fastener Anti-Rust Tester ASTM B117 JIS H8502 Salt Spray Measuring Meter

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: LR-120A
• Rated Interior Capacity: 600L
• Usable Internal Cavity Dimensions: 120×100×50 (L×W×H) cm
• Transport Package: Wooden Package
• Trademark: LANSHOU
• Origin: China

Product Description

Product Description

 

ISO 9227 IEC 60068 Briny Fog Fastener Anti-Rust Tester ASTM B117 JIS H8502 Salt Spray Measuring Meter
Basic Parameters

 

Model	LR-120A
Nominal Internal Volume	600L
Effective Inner Chamber Size	120×100×50 (L×W×H) cm
Overall External Dimensions	Approx. 210×125×130 (L×W×H) cm
Weight	Approx. 230 kg
Max. Power	4 KW
Max. Current	18 A

 

Power Supply Conditions
 

Power Supply

AC 220V, single-phase two-wire +protective earth

 

Allowable voltage fluctuation ±10% V

 

Allowable frequency fluctuation 50±0.5 Hz

 

Power supply mode TN-S or TT system

 

Protective earth grounding resistance less than 4 Ω

 

A separate independent air switch or power switch with appropriate capacity shall be configured on-site for the equipment.

 

Performance Specifications

Item	Details
Ambient Operating Conditions	1. Ambient temperature: 5~30ºC, relative humidity ≤85% R.H. 2. Install on flat and vibration-free ground. 3. Keep away from heat sources, flammable and explosive materials. 4. Avoid direct sunlight, ensure good indoor ventilation.5. Install in clean areas; do not place in dusty locations or near exhaust outlets.
Temperature & Humidity Range	Test Chamber Temperature: RT ~ 50ºC Pressure Barrel Temperature: RT ~ 63ºC Relative Humidity: ≥85% R.H
Heating Rate	Test Chamber: RT → 50ºC ≤ 60 min Pressure Barrel: RT → 63ºC ≤ 60 min
Core Technical Parameters	Temperature Resolution: 0.1ºC Temperature Deviation: ±2ºC Temperature Uniformity: ±2ºC Temperature Fluctuation: ±1ºC Spray Volume: 1.0~2.0 ml/80cm²/h (average value over minimum 16 hours collection) Spray Pressure: 1.00±0.01 kgf/cm² Original Solution pH: Neutral 6.0~7.0; Acidic 3.0~3.1 Spray Solution pH: Neutral 6.5~7.2; Acidic 3.1~3.3 Timer Range: 1 second ~ 9999 hours, freely adjustable
Note on pH Value	CO2 loss in spray solution may cause pH drift. Mitigation methods: heat the solution above 35ºC before loading, or prepare solution with fresh boiled water to reduce CO2 content. For acid or copper-accelerated salt spray tests, prepare base solution pH to 2.8~3.0 and verify solution/solute quality to maintain stable pH.
Applicable Standards	1. GB/T2423.17-2008 / IEC 60068-2-11-1981 Salt mist test 2. ASTM B117-2009 Standard Practice for Operating Salt Spray (Fog) Apparatus 3. JIS H8502 Salt spray testing method 4. GB/T10125-2012 / ISO 9227-2006 Corrosion tests in artificial atmospheres - Salt spray tests 5. GB/T5170.8-2008 Environmental testing equipment for electronic products - Inspection methods for salt mist test equipment 6. GB/T5170.11-2008 Environmental testing equipment for electronic products - Inspection methods for corrosive gas test equipment 7. ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests 8. GB/T10587-2006 Specification for salt mist test chambers

ISO 9227 IEC 60068 Briny Fog Fastener Anti-Rust Tester ASTM B117 JIS H8502 Salt Spray Measuring Meter
Structural Features

 

1).Chamber Structure

 

Main chamber: 8mm thick imported PVC sheet (Formosa Plastics, Taiwan), max sustainable temperature 85ºC

 

Sealing cover window: 8mm imported PVC + acrylic window

 

Hidden reagent replenishment bottle with water level detection, easy to clean and break-resistant

 

SUS304 stainless steel high-pressure air saturation barrel with good thermal insulation

 

Specimen rack: adjustable flat indexing rack, multi-angle exposure for uniform fogging and large sample capacity

 

Pneumatic sealing cover + water-sealed structure to prevent corrosive gas leakage

 

Integrated left-right control cabinet & test chamber, easy operation; water-electricity separation design to protect electrical components

1000-angle sloped cover to avoid condensate dripping onto test samples

 

2).Control Panel

 

Indicator lights: water shortage, overtemperature, cycle end, spray, defog

Controllers: test chamber temperature controller, pressure barrel temperature controller, timer, total runtime meter, pressure gauge

Switches: main power, operation, timing, spray, defog

 

3).Electric Control Cabinet

 

Solenoid valves: water filling, spray, defog; distribution board

overtemperature protector, air saturation barrel, spray regulating valve

 

4).Heating System

 

Steam heating mode, titanium alloy heating tubes, PID temperature control for stable temperature

 

5).Water Supply System

 

Test chamber & pressure barrel water supply: dual manual / automatic water replenishment; can connect to tap water (install filter if tap water contains impurities or acid/alkaline substances)

Brine supply: hidden large reservoir, manual refilling

 

6).Drainage System

 

Manual drain valve for wastewater discharge

 

7).Spray System

 

Bernoulli atomization principle for uniform salt fog,

Prevent anti-crystallization clogging 

Special glass nozzles;

wall-mounted adjustable spray boxes for even fog distribution without occupying test space

Continuous spray mode

 

8).Air Supply System

 

Two-stage pressure regulation: primary compressed air regulated to 2kg/cm² and heated in saturation barrel; secondary regulated to 1kg/cm² for formal spraying

 

9).Exhaust & Defog System

 

Automatic pressure-balanced exhaust device (connect external exhaust pipe)

Manual defog button to quickly clear fog before opening the chamber lid

Exhaust pipe must extend outdoors, avoid corrosive surroundings and sagging bends that cause condensate blockage

 

10).Electrical Control System

 

Controllers	microcomputer PID controllers (test chamber / saturation barrel)
Input	keypad setting;
Display	set temperature, actual temperature,
Timer	digital timer, 1s ~ 9999h, multi-time unit switchable
Temperature Sensor	PT100 platinum resistance
Control Mode	anti-windup PID, BTC balanced temperature control
Operation Mode	continuous operation, cumulative runtime meter

 

11).Safety Protection Devices

 

Test Chamber	overtemperature limit protection, water shortage protection
Saturation Barrel	overtemperature limit protection, water shortage protection
Heating System	dry-burn protection, abnormal water supply/drainage protection
Power System	earth leakage protection, overload & short-circuit protection
Environmental Requirements Storage Ambient Temperature	0ºC ~ +45ºC

 

12).Acceptance & Third-Party Calibration

 

Acceptance criteria:specified in the formal technical agreement

 

Acceptance location:on-site inspection at the buyer's premises

 

Third-party inspection (authorized national environmental test equipment inspection institute): buyer bears the cost for pre-delivery third-party verification; re-inspection costs for initial non-compliance shall be borne by the supplier

 

Buyer may independently commission official third-party calibration
 

Detailed Photos