| After-sales Service: | Online |
|---|---|
| Warranty: | 1 Year |
| Type: | Lamp Cap Not Go Gauge |
| Weight: | 0-100Kg |
| Power Source: | AC220V |
| Transport Package: | Plywood Case |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier IEC 60061 7006-28D-1 Lamp cap not go gauge E40 Finished lamp cap thread minimum outside diameter test
E40 lamp holder gauge
technical standard: G 1483.1-2008; IEC 60061-3:2004
| Reference | Dimension/(mm) | Tolerance/(mm) |
| d | 39.05 | +0.0/-0.01 |
| Weight | 0.35kg | ±10% |
| L | 25.0 | +0.0/-0.01 |
| T | 20.0 | +0.5/-0.5 |
| U | 1 | +0.0/-0.1 |
| V | 26.0 | +0.05/-0 |
| W | 2 | ±0.1 |
| α | Approx. 45° | |
IEC 60061 7006-28D-1 Lamp cap not go gauge E40 Finished lamp cap thread minimum outside diameter test
Purpose:
To check the minimum outside (major) diameter of the screw thread.
IEC 60061 7006-28D-1 Lamp cap not go gauge E40 Finished lamp cap thread minimum outside diameter test
Testing :
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface "X". Only the weight of the gauge itself shall be used in the test.
IEC 60061 7006-28D-1 Lamp cap not go gauge E40 Finished lamp cap thread minimum outside diameter test
Purpose:
To check the minimum outside (major) diameter of the screw thread.
IEC 60061 7006-28D-1 Lamp cap not go gauge E40 Finished lamp cap thread minimum outside diameter test
Testing :
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface "X". Only the weight of the gauge itself shall be used in the test.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}