| After-sales Service: | Online |
|---|---|
| Warranty: | 1 Years |
| Max Diameter of Workpiece: | <500mm |
| Type: | Low Temperature Impact Tester |
| Accuracy Grade: | 1 |
| Control: | Manual Control |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
Applicable standards:
ØGB/T 3808-2002 "Pendulum impact testing machine"
ØGB/T 229-2007 "Method of impact test of Charpy pendulum in metallic materials".
ØJJG 145-2007 "Pendulum impact testing machine"
ØASTM E23-07A "Standard Test Methoods for Notched Bar Impact Testing of Metallic Materials".
ØISO 148:1998 Metallic Materials -Charpy pendulum Impact Test
ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
Main Technical Specification
| NO | ITEM | UNIT | SPECIFICATION |
| 1, | Host machine | ||
| 1 | Impact energy | J | 500J (Energy switching can be completed by replacing the pendulum ) |
| 2 | Pendulum pre-lift Angle | degree | 150° |
| 3 | Angular minimum resolution | degree | 0.1° |
| 4 | Impact speed | m/s | 5.2m/s |
| 5 | Sample support span | mm | 40 |
| 6 | The circular radius at the end of the sample support | mm | 1~1.5 |
| 7 | Inclination Angle of the sample bearing surface | degree | 11°±1° |
| 8 | Radius of impact knife arc | mm | 2mm,8mm(The knife edge replacement should be simple, replace the knife edge without replacing the pendulum) |
| 9 | Impact knife Angle | degree | 30°±1° |
| 10 | Impact tool thickness | mm | 16 |
| 11 | Minimum resolution | J | 0.1J |
| 2, | Automatic sample feeding device | ||
| 1 | Automatic sample feeding device | Sample delivery: pneumatic Positioning mode: pneumatic |
A maximum of 40 U-shaped or V-shaped samples can be installed at one time. The time between the sample coming out of the low greenhouse and the impact completion is less than 5S, and the whole impact cycle of a single sample is about 10S. |
| 3 | Low temperature system | ||
| 1 | Compressor refrigeration cryogenic device |
Refrigeration medium: Freon |
Range: room temperature to -60ºC Temperature control accuracy: ±1ºC Temperature uniformity: ±1ºC Cooling speed: +30ºC ~ -60ºC, compressor refrigeration, no more than 90 minutes; |
| 4 | auxiliary system | ||
| 1 | computer | / | HP business machine |
| 2 | Printer | / | HP inkjet printer |
| 3 | shield | / | Removable for easy maintenance |
ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
Functions and uses:
This series impact testing machine is designed and manufactured according to ISO 148:1998, GB/T 3808-2010 "pendulum impact testing machine inspection" and so on. Fully meet the requirements of domestic and international metal material impact test standards.
This series of impact testing machine can not only test the impact resistance of metal materials at room temperature and low temperature, but also test the toughness and brittleness conversion temperature of materials. It can be widely used in research institutes, testing institutions, colleges and universities, aerospace, metallurgy, machinery manufacturing, pressure vessels, ships, vehicles, Bridges, wind power and other industries for precision material research, material analysis, material development, material selection, process improvement and quality control.
ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
Technical characteristics and advantages:
The equipment is mainly composed of host frame, pendulum, hanging pendulum device, transmission system, energy display device, safety protection device, electrical control system, low temperature device, automatic feeding device and other parts, each part has the following advantages:
According to the principle of principle, the main frame and base are cast separately, which is a traditional impact mechanism manufacturing process and has high requirements for assembly. Our company produces tens of thousands of such models, which has mature process and minimal assembly error. The pendulum is supported by cantilever, and the energy loss of each equipment is minimized by strict requirements of coaxiality processing and careful inspection of accessories.
ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
A vibrating pendulum: Traditional pendulum design ensures that the initial potential energy of the pendulum is accurate, using precise counterweight calculations. Impact knife by screw fastening wedge block pressing installation, easy to replace.
Hanging device: The device uses a damping bar to cushion itself, automatically hanging the pendulum when it reaches the desired position, and the pre-lift Angle of the pendulum stays the same.
According to the scheme, the driver uses a traditional motor drive system to control the motion by transmitting signals via an induction switch, which allows the system to precisely pick up and stop the motion.
The energy display device costs money to buy a way of displaying energy: Either using a dial or using a computer to display energy values. If it is a single dial type, it may happen before the test forget to return the pointer to zero and cause the sample to be invalid. This machine two kinds of common display, the results can be compared with each other, can effectively eliminate possible problems.
Safety protection device: The whole testing machine is equipped with a semi-closed protective net, which effectively prevents splashings of broken samples and prevents testers from entering the testing machine during the test, ensuring the safety of testers.
Buy a ticket electrical control system: The device uses a computerized control system, which uses an internal, high-precision rotary encoder to get the real-time position of the pendulum. Therefore, the system has the characteristics of reliability, stability and data accuracy. The control system integrates machine, electricity and automatic control technology, realizing the automatic process of pendulum taking, automatic feeding and impact, greatly reducing the labor intensity of operators, improving work efficiency and operation safety.
Cryogenic cooling device (see Figure 3)
u The equipment is composed of single stage cascade refrigeration compressor unit, heating device, electrical control, automatic alarm device and other parts.
Principle of refrigeration
u After starting the refrigeration switch, the high-temperature compressor starts to work and the internal timer starts to time. When the starting condition of the low-temperature compressor is reached (about 6 minutes), the low-temperature compressor automatically starts and the refrigeration system enters the formal working state. Refrigeration compressor continuously work, when approaching the set temperature, the heating device in the cooling box begins to provide heat in proportion, through PID regulation to balance the excess cold generated by the refrigeration system, in order to achieve the purpose of constant temperature.
Ø Low greenhouse device structure principle
u The refrigerating chamber is a hatchback structure, and its biggest advantage is that if the problem of frozen sample or stuck sample occurs in the cold chamber, it can be solved by lifting the cover. The cold chamber is mainly composed of shell, sample groove, cold chamber, sample groove, temperature sensor and so on. The temperature sensing probe is the temperature measuring and controlling element when working.
The sample box can be loaded with 10×10×55mm standard samples up to 40 pieces at a time, and the direction of the sample notch should be strictly paid attention to when installing samples. To prevent the samples from freezing together, spray alcohol (ethanol) evenly on the samples after placing them. (But pay attention to prevent open fire, to prevent the occurrence of fire). The sample can also be in low temperature resistant oil for a while, and then put into the cold chamber. If the sample is frozen in the cold chamber, the cylinder can not push the sample! 
ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
positioning device
u the sample must be close to the side of the anvil base, so that the sample notch is correctly located in the center of the pendulum axis. The specimen is attached to the side of the anvil base and is secured by a positioning block. Sample from rod directly or send to the anvil block before, due to the positioning the role of the press block, make the sample to the anvil block profile forward movement, when the sample backend is not out of positioning pressure fast, after front end into the anvil block surface (2 mm ~ 3 mm), pneumatic device (figure 3) directly or indirectly from the magnetic switch on the cylinder of the signal, positioning cylinder, then positioning device, The positioning rod of the positioning device is in the working position, and the elastic top column on the side of the positioning device compacts the sample until the front end of the sample is close to the positioning surface of the positioning mechanism to complete the positioning work of the sample.
u When the sample cylinder returns, the positioning cylinder is reset after receiving the signal, and the positioning device is far away from the sample for impact.
ASTM E23 AMicro Computer Controlled Automatic Low Temperature Impact Tester
SoftwareSoftware supports multiple pendulums
Record impact strength, impact energy, etc. Maximum and minimum mean and standard deviation can also be calculated.
Automatic calculation of experimental results. Automatic measurement of swing period (test results and report window as above)
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}