| After-sales Service: | Online |
|---|---|
| Warranty: | 1 Years |
| Max Diameter of Workpiece: | <500mm |
| Type: | Strong Gage Signal Generator |
| Accuracy Grade: | 1 |
| Control: | Manual Control |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier YM-26A Strong inspection tool signal generator,Strong gage signal generator
Introduction
Used to test the sampling frequency of the tensile testing machine
YM-26A Strong inspection tool signal generator,Strong gage signal generator
Structure principle
Tensile testing machines require only a few milliseconds or even a few hundred microseconds for specimens to break, so it is easy to obtain incorrect strength values when the sensor is sampling at a frequency of only a few tens of Hertz, such as after the specimen has been broken.
This instrument outputs pulses to simulate the fracture process of the specimen during the test by the tensile testing machine, in order to test the authenticity of the tensile testing machine to the strength of the specimen before fracture.The output pulse width and amplitude can be adjusted.When in use, the instrument sends out a pulse, when the pulse reaches the falling edge, the measured tension will be considered as the sample has been broken, showing the breaking strength value.If the sampling frequency of the tension machine under test is high enough, the breaking force will always be the same whether the pulse width is set to 1 second or 1 millisecond.If the breaking force displayed at the minimum pulse width of 20 ms is consistent with the pulse width above 500 ms, then the effective sampling frequency of the machine is only 50 Hz.
YM-26A Strong inspection tool signal generator,Strong gage signal generator
Technical parameters
| ranges from 5V to 24V | ranges from 5V to 24V |
| Sensor resistance | 350Ω |
| Output pulse amplitude | 0.1 ~ 20mV |
| Output pulse width | 0.5mS~1000mS |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}