| After-sales Service: | Online Service |
|---|---|
| Warranty: | 1 Year |
| Transport Package: | Plywood Cases |
| Specification: | 35*32*25CM |
| Trademark: | LONROY |
| Origin: | China |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
RH-CC10 Film puncture strength tester Diaphragm puncture tester ASTM F1306
Product introduction
RH-CC10 film puncture strength tester adopts automatic clamping device to complete the test automatically, with accurate and stable test data and good repeatability. It is suitable for measuring the puncture resistance (puncture strength, puncture strength and puncture elongation) of battery diaphragm, film, composite film for packaging, bag and other thin sections against penetration by puncture needle.
Test method:
Place the test piece with a diameter of 100mm on the fixture with a diameter of 10mm or 50mm directly in the inner hole, press the test key, the instrument automatically clamp the sample, and then use a steel needle with a diameter of 1.0mm and a spherical tip radius of 0.5mm to remove the puncture at the speed of (50 oz 5) mm/min or (100 oz 10) mm/min
Take the maximum load of the needle through the test piece. The instrument calculates the puncture strength automatically. Note: If the number of test pieces is more than 5, the technical average is taken.
RH-CC10 Film puncture strength tester Diaphragm puncture tester ASTM F1306
Working mode:
Puncture strength: The maximum force required for a piercing needle to penetrate a pattern vertically.
Penetration strength: Test the penetration strength per unit thickness.
Puncture elongation: After the puncture needle contacts the sample, the starting point is when the force value reaches the pre-pressure, and the position distance of the puncture needle until the sample penetrates.
Main technical parameters
|
Measuring range |
(0-50) N |
|
resolution |
0.01N |
|
accuracy |
±0.5% (0.5 grade) |
|
Load sensor |
The resolution is 0.01N |
|
Puncture needle |
Φ : 1.0mm |
|
Spherical tip |
R: 0.5 mm |
|
Test speed |
(100 oz 10)mm/min or (50 oz 5)mm/min (optional) |
|
Sample holding fixture |
Inside diameter of (10 oz 0.1) mm or (50 oz 0.5) mm (optional) |
|
Power supply |
AC 220V±22V, 50Hz |
|
Overall dimension |
330 * 350 * 390 mm |
|
quality |
About 20 kg |
|
Air compressor |
User self configuration |
Standard
GBT 37841-2019 Plastic films and sheets -- Test method for puncture resistance
GB/T36363-2018 Polyolefin separator for lithium ion batteries
General rules of GB/T21302-2007 composite film and bag for packaging
Purpose: Diaphragm puncture test.
Product features:
1, high precision
High precision force sensor is adopted to ensure the error of test accuracy within ±0.5%.
2. Good repetition
The stepper motor is used to control the probe, and the measuring process is accurate and stable, with good repeatability.
3, easy to use, easy to operate
LCD touch screen Chinese display, friendly man-machine interface operation. Using automatic clamping device, fully automatic completion of the test, with the test data statistical processing function, micro printer output, can also be connected to the computer operation. When connected to the computer, in addition to the automatic memory storage results, but also can display the rupture curve and save.
4. Easy to measure and calibrate
The instrument is equipped with special calibration weights and built-in calibration procedures, which is convenient for the measurement and calibration department (the third party) to calibrate the instrument.
RH-CC10 Film puncture strength tester Diaphragm puncture tester ASTM F1306
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}