KDZD Portable partial discharge tester detector
Product Introduction
High sensitivity: amplifier system dynamic range; The test range is wide and the operation is simple
Strong anti-interference ability: anti-interference components and gate display circuit
It has four kinds of high frequency elliptical scanning: suitable for high-voltage product type, factory test, new product development test, motor, transformer, cable, etc. Quantitative testing of partial discharge of other high voltage appliances.
Suitable for switchgear, transformer and GIS partial discharge on-line detection and location;
High-speed AD conversion circuit completes signal digitization;
Equipped with complex TEV sensor, ultra-high frequency sensor, high frequency, current transformer and high sensitivity ultrasonic sensor;
Equipped with complete functions;
GIS switch drive mechanism fault detection;
Prevent the switch from malfunction.
Principle of detection
Continuous detection of UHF, ground electric wave and ultrasonic signals to determine whether there is partial discharge
The real-time display of the measured signal change trend can make a more intuitive judgment on the development of partial discharge signal
It has the function of on-site storage of data
KDZD Portable partial discharge tester detector
Screen display: High contrast 3.5 inch TFT color screen
Data storage: It can save 1000 groups of test data
Working power: built-in 8.4V lithium battery, can work continuously for 8 hours
Power supply: input 100-240VAC, output 8.4V/3A, charging time 3 ~ 4 hours
Dimensions: 220*100*40
Instrument weight: 1.5kg
Operating temperature: -25ºC~45ºC
Storage temperature: -35ºC~60ºC
Complete set of configuration: host, sensor, AC adapter, connecting cable and transport box
Scope of application |
Use non-intrusive detection method to detect and locate partial discharge defects of high voltage electrical equipment |
Sensor configuration |
Standard equipment: Ultrasonic sensor (UA), Earth wave sensor (TEV)
Optional: special sensor network for transformer, special UHF sensor for GIS, special sensor for high voltage cable, can also be customized according to user requirements. |
Detection principle |
ultrasonic (UA), Earth wave (TEV) and ultra-high frequency (UHF) |
Detection frequency band |
Ground wave: 40 ~ 200KHz
Uhf: 3~100MHz
Uhf: 300 ~ 2000MHz
Range of measurement
Ground wave: -90 ~ 80dB
Uhf: -80 ~ 10dBm
Uhf: -80 ~ 10dBm |
Sensitivity: min 10pC(depending on the distance between sensor and discharge source) |
sensor
Ultrasonic sensor: 20 ~ 200(kHz)
Earth wave (TEV) : 5 ~ 100MHz
Uhf sensor: 300 ~ 2000(MHz), with directional receiving characteristics |
With built-in ultrasonic sensor, ground wave, ultrasonic two-in-one sensor, optional transformer special sensor,
GIS special sensors, cable special sensors and other components |




