Distribution Network 6-35kv Small Current Overhead Line Cable Single-Phase Grounding Fault Locator

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: KDJK-10
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Case
• Trademark: LONROY
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200pieces/Month

Product Description

Distribution network 6-35kV small current overhead line cable single-phase grounding fault locator

KDJK-10 distribution network overhead line single-phase grounding fault locator is suitable for 6-35kV overhead line single-phase grounding fault line, when the line is shut down due to single-phase grounding fault, the equipment can be accurately located at the docking point.

KDJK-10 single-phase ground fault locator for overhead lines in distribution network is a set of portable equipment, which can locate faults of multiple lines. The whole equipment consists of KDJK-10 transmitter, KDJK-A sensor, KDJK-B receiver and accessories. After the fault line is shut down, the transmitter applies ultra-low frequency high voltage signal to the line to make the fault repeat, and the sensor is hung on the line with an insulated rod along the line to detect the signal, and the data is transmitted wirelessly to the receiver on the ground, and the receiver displays the measurement result. Before the fault point, the current continues to exist, after the fault point, the current disappears. The fault location can be quickly determined by rough segmentation followed by precise fixing.

Distribution network 6-35kV small current overhead line cable single-phase grounding fault locator

Product characteristics
1. Suitable for distribution network of small current grounding system, detecting single-phase metallic grounding, arc grounding, transition resistance grounding and other faults of overhead lines.
2. Locate the line after it stops running, especially for faulty lines with cable branches.
3. By injecting detection signals into the fault phase of the line to determine the single-phase grounding fault point, reduce blindness and shorten the fault detection time.
4. In the state of line power failure, the single-phase ground fault can be quickly and accurately located, and the error must not exceed 1 meter.
5. Using dichotomy for detection, without the need for full line inspection, shorten the fault detection time.
6. When the line is running normally, the line load current (0-1000A) can be detected.
7. Operate on the ground through the insulation rod, and there should be a fuse protection device inside the device to ensure personal safety.
8. The device built-in ultra-low frequency composite signal source, power signal source, high voltage signal source a variety of power modules, the device to achieve a variety of working modes.
9. The device is equipped with a variety of receiving systems, which do not interfere with each other, and can be tested simultaneously or separately.
10. Apply a high voltage signal to make the fault repeat, the current signal is stable and easy to detect.
11. Ultra-low frequency signal avoids the influence of system distributed capacitance, and can locate faults with high resistance values.
12. Transmitter safety features: high voltage start blocking function, output allows direct short circuit.
13. The sensor uses high sensitivity sensor, open design, no need to close, easy to connect on the line.
14. Sensor and receiver wireless communication transmission, safe and reliable.
15. The signal and data measured by the device may be saved to the system background, and the communication protocol is universal.
16. The device has a variety of protection functions and has good safety test performance.
17. The transmitter can use mains power, generator power supply, sensor and receiver dry battery power supply.
18. When the power supply voltage is too low, the alarm should be prompted to charge.
19. The size of the different frequency signal sent is adjustable.
20. The frequency and power signal are adjustable.
21. Operate through the insulated rod and have a fuse protection device inside.
22. The device built-in ultra-low frequency composite signal source, power signal source, high voltage signal source a variety of power modules, the device to achieve a variety of working modes.
23. Small size and light weight of transmitter; The sensor is designed to reduce the volume and weight, and it is convenient to connect along the line. The receiver is designed for handheld.
24. The receiver uses a large-screen LCD display to display the sensor status, current waveform and current value.

Distribution network 6-35kV small current overhead line cable single-phase grounding fault locator

Scope of application	6-35kV overhead line single-phase ground fault line
Positioning accuracy	0.2m.
Transmitter output characteristics
Output frequency	1Hz
Open circuit voltage	fundamental wave RMS 0 ~ 2800V
Current test range	100mA
Ground fault measurement range	Ground resistance ≤100 Kω
Pulsating DC	0 ~ 8kV, equivalent to the peak phase voltage of 10kV lines
Detection line length	≥120km
Short-circuit current	fundamental wave RMS 0 ~ 30mA
Signal output range	0 ~ 100mA
Signal output accuracy	±1mA
Wireless communication distance between sensor and receiver	not less than 30m Transmitter output power: Maximum power 900W
Transmitter power supply	AC 220V mains, generator (output power ≥1500W)
Weight	15kg
Volume	455×335×310mm

Signal transmitting sensor

Detect the cross-frequency signal emitted by the test signal generator.
Automatic timing
Automatically displays the communication status with the pliers meter.
Automatic display of device voltage.
Automatic low voltage alarm.
Detects the load current of the line.
Clamp CT was used to measure the different frequency signal and load current.
Can be used to measure insulated lines.
Can display the current clamp battery status and battery voltage in real time.
Test accuracy	±1%±3dgt(23ºC±5ºC, below 80%RH)
Detection range	0.1mA ~ 100.0mA
Transmission mode	wireless RF mode
Transmission frequency	433MHz
Transmission distance	≥40mm
Working temperature	-30ºC ~ 70ºC
Power supply	3 No. 7 alkaline dry batteries.
Weight	0.45kg
Volume	180×100×35mm

cable grounding fault locator

Signal receiver

Receive and display data from a handheld data detector.
You can lock and hold data.
In automatic pairing, the communication status with the pliers meter is displayed automatically.
Automatic display device voltage, automatic low voltage alarm.
Display the detected signal size in digital mode.
Data transmitted by handheld signal detection devices can be stored.
Display mode	Large screen LCD, backlight function.
Historical data can be stored	≥500 times.
You can set up a variety of ways to work.
Data from the host and receiver can be read.
Working temperature	-30ºC ~ 70ºC.
Power supply	5 No. 5 alkaline dry batteries.
Weight	0.45kg
Volume	205 ×100×35mm