Single Arm Package Drop Tester One Wing Drop Hammer Impact Tester

• Customization: Available
• Warranty: 1 Year
• Type: Package Drop Tester
• Model NO.: LR-F022-B
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Display: Digital
• Control: Manual Control
• Weight: 300kg
• Power Source: AC220V
• Transport Package: Plywood Cases
• Specification: 170*120*232cm
• Trademark: LONROY
• Origin: Guangdong
• Production Capacity: 200

Product Description

Single Arm Package Drop Tester One Wing Drop Hammer Impact Tester
Product use:
This machine is specially used to test the damage of product package to fall and evaluate the applicable standard of impact strength during transportation and transportation: ISO2248 jisz0202-87 GB/ t4857.5-92

Single Arm Package Drop Tester One Wing Drop Hammer Impact Tester
Machine features:
Single arm drop tester can perform free drop test on the surface, Angle and edge of the package, equipped with digital height indicator and decoder for height tracking, so that the product drop height can be accurately given, and the error with the preset drop height should not exceed 2% or 10MM.The machine adopts single arm and double column structure, with electric reset, electric drop control and electric lift device.The unique buffering device greatly improves the service life, stability and safety of the machine.Single arm setting, easy to place product.

Single Arm Package Drop Tester One Wing Drop Hammer Impact Tester
Main technical parameters:

Drop height mm	300-1500 adjustable
Maximum weight of specimens	0-80kg
Base thickness	10mm (solid iron plate)
Maximum size of specimen mm	800 x 800 x 1000
Impact panel size mm	1700 x 1200
Drop height error	±10mm
Appearance and size of the test bench mm	1700 x 1200 x 2315
Net weight kg	300kg
Test method	Flat drops,Edge Drops,Corner Drops
Control mode	electric
Drop height error	1%
Parallel error of hitting panel	≤1°
Error of Angle between falling surface and level during falling	≤1°
Power	AC380V 50HZ 1.85KWA

Single Arm Package Drop Tester One Wing Drop Hammer Impact Tester
Machine studio environment requirements
28 ºC temperature: 5 ºC ~ + [1] average temperature 28 ºC or less (24 hours)
Relative humidity:≤ 85%RH
Power supply conditions three-phase four-wire + protection ground line,
Voltage range: AC (380 ± 38) V