| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tonghui TH8601 Wire/Harness Comprehensive Tester Cable Testers TH8601A
Brief Introduction
TH8601 series four-terminal wire tester is multifunctional and automatic test system of wire comprehensive parameters, which is exclusively used in quality and connection reliability test for various kinds of cables, wiring harness and winding displacement. This system provides programmable constant current & constant voltage source and high-voltage power supply. The test items include continuity, passive element (inductance, resistance, capacitance and diode), AC/DC withstand voltage, insulation resistance and sll kings of high and low voltage parameters. Adopting advanced LCR figure sampling and channel switching technique of high speed and long life, this system significantly improves the test precision, speed and working life. Also, this system adopts high and low voltage isolation technique, so the testing performance of the insulation resistance is greatly advanced. Various interfaces of RS232, RS485, GPIB, USB, LAN and handler are convenient for users to apply to automatic detect and production line.
Tonghui TH8601 Wire/Harness Comprehensive Tester Cable Testers TH8601A| Model | TH8601 | TH8601A | ||
| Test Pin | 128 Pin | 64 Pin | ||
| Test Signal Source | Sine Signal Source:50Hz-300kHz, ProgrammableCapacitance Component Test 1Vrms | Frequency: 0.02% 1Vrms, Voltage 10% | ||
| Programmable DC Signal Source:5Vdc MAX | 10% | |||
| Programmable DC Current Source:1-20mA | 10% | |||
| Programmable DC High Voltage Source:1mA Max | 5V-100V | 10%±1 digit | ||
| 100Vdc-1000Vdc | 5%±1 digit | |||
| Programmable AC High Voltage Source:10mA Max | 50V-100Vac | 10%±1 digit | ||
| 100Vac-750Vac | 5%±1 digit | |||
| Channel Plate on-off scanning Signal Source:5Vdc | ||||
| Test Speed | Transient Open and Short Circuit (128 points) Sample Standard:10ms | Indicates the time of sweeping 64 NET O/S at a time | ||
| Basic Value of Test Speed:100ms | Indicates the measurement time of single passive component or the total measurement time of one cable | |||
| Capacitance Measurement | Range: 0.1pF-300pF(sample 10pFmin) | 10%±3 digit | ||
| Range: 300pF-1000μF | 5%±3 digit | |||
| Resistance Measurement | 10mohm-1Mohm | 5%±1 digit | ||
| Cond./Interval cond. | 10mohm-50ohm | 5%±5 digit | ||
| Open andShort Circuit | 1kohm-50kohm | 10%±1 digit | ||
| Diode Testing | 0-10V | 10%±1 digit | ||
| Insulation Resistance | 1Mohm-100Mohm | 5%±5 digit | ||
| 100Mohm-1000Mohm | 10%±5 digit | |||
| DC Leakage Current | 1μA-1000μA | 5%±2 digit | ||
| AC Leakage Current | 0.01mA-5mA | 10%±5 digit | ||
){kind=link}