| After-sales Service: | Online |
|---|---|
| Warranty: | 1 Year |
| Type: | Live Cable Identification Instrument |
| Maxcapacity: | <1000KN |
| Accuracy Grade: | 1 |
| Load Way: | Electronic Load |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier KGSB-23 Live Cable Identification Instrument Cable Fault Locator Cable Integrated Detector
Product Introduction
KGSB-23 Live cable identification instrument is designed for power cable engineers and cable workers to solve the technical problems of cable identification. The user can accurately identify one of the target cables from multiple cables through the instrument to avoid serious accidents caused by missawing live cables.
KGSB-23 live cable identification instrument has the functions of live cable identification, power failure cable identification, AC current test, AC voltage test, and is composed of transmitter, transmitting current clamp, receiver, receiving flexible current clamp, etc.
KGSB-23 Live Cable Identification Instrument Cable Fault Locator Cable Integrated Detector
Product Characteristics
1. The user accurately identifies one of the target cables from multiple cables through the instrument to avoid serious accidents caused by missawing live cables.
2, cable identification is from the operation of both ends of the cable, we must ensure that the double number of the cable is accurate, the instrument design uses PSK technology, combined with accurate algorithms. No matter how reliable the memory of field workers is, it is no substitute for the recognition of professional instruments.
3, at the same time with live cable identification, power failure cable identification, AC current test, AC voltage test function, by the transmitter, transmitting current clamp, receiver, receiving flexible current clamp and so on.
KGSB-23 Live Cable Identification Instrument Cable Fault Locator Cable Integrated Detector
Product Parameters
Transmitter technical parameters
| Function |
The composite pulse frequency current signal is emitted, the remaining battery voltage is displayed, and the emission state is dynamically indicated |
| Electric source |
The composite pulse frequency current signal is emitted, the remaining battery voltage is displayed, and the emission state is dynamically indicated |
| output mode |
Caliper coupling during electrification identification; Power outage identification directly connected output |
| emission frequency |
625Hz, 1562Hz, 2500Hz, 10KHz (live identification), press the up and down arrow key to adjust the transmission frequency |
| impulse voltage |
500V (when power failure is recognized) |
| pulse current |
Max 5A (depending on the size of the loop resistance) |
| impulse frequency |
1 time/second |
| pulse width | 2ms |
| Inside diameter of firing clamp | φ120mm |
| Test line length |
1 time/second |
| Firing clamp size | Length and breadth 300mm×175mm×50mm |
| Inside diameter of firing clamp | φ120mm |
| Launching clamp wire length | 2m |
| Ground pin size | Length and breadth 225mm×100mm×10mm |
| Transmitter size | 320mm×275mm×145mm |
| Firing clamp size | Length and breadth 300mm×175mm×50mm |
| display mode | Large LCD displays the remaining battery voltage in real time with backlight |
| LCD size | Length and width 128mm×75mm; The display domain is 124mm x 67mm |
| out packing size | length, width and height 400mm×245mm×335mm |
| operating temperature | -10ºC~40ºC |
| storage condition | -20ºC~50ºC,≤95%RH, non condensing |
| Backlight control | Yes, white backlight |
| operating temperature | -10ºC~40ºC |
| storage condition | -20ºC~50ºC,≤95%RH, non condensing |
| Instrument quality | Transmitter 2.5kg; Launching clamp 1.08kg; Total weight 4.4kg (including receiver) |
| battery capacity | When the battery voltage is lower than 9.65V, the battery low voltage icon is displayed to remind you to charge the battery. When it is lower than 9.5V, the device automatically shuts down |
| charger | 12.6V DC charger |
| charging port | Circular charging interface, DC logo |
| Compression resistance | The transmitter adopts the integrated special tool box design, the box can withstand the pressure of about 200kg |
| Pressure resistance | AC 3700V/rms(Instrument box top and bottom before) |
| electromagnetic property | IEC61326(EMC) |
| Reference safety | IEC61010-1(CAT III 300V,CAT IV 150V,Pollution Level 2) |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}