DRL-V table thermal conductivity tester thermal resistance tester ASTM D5470

• Customization: Available
• After-sales Service: online
• Warranty: 1 year
• Model NO.: DRL-V
• Type: thermal conductivity tester
• Weight: 35KG
• Power Source: AC220V
• Number of samples: 1 piece (multiple films)
• Transport Package: Plywood Case
• Specification: 500× 400× 780mm
• Trademark: langshuo
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

substrate thermal conductivity tester thin thermal conductors thermal resistance tester ASTM D5470
1.Product introduction
It is mainly used to test the thermal resistance of thin thermal conductors, solid electrical insulating materials, thermal conductive silicone grease, resin, rubber, beryllium oxide porcelain, alumina porcelain and other materials, as well as the contact thermal resistance at the solid interface and the thermal conductivity of the material. The detection material is solid sheet, and the enclosed frame can detect powder state material and paste material. Instrument reference standard: MIL-I-49456A "Insulation sheet, heat conductive resin, heat conductive glass fiber reinforcement"; GB/T 5598-2015 "Beryllium oxide porcelain thermal conductivity determination method"; GB/T 29313-2017 "Test method for heat conduction properties of electrical insulating materials"; ASTM D5470-2017 "Test standard for Heat transfer Performance of Thin Thermally Conductive Solid Electrical Insulating Materials", etc.

The instrument is designed and manufactured in accordance with ASTM D5470-2017 standard. Our company has accumulated more than ten years of experience in manufacturing and user practice, so that the product performance continues to improve and mature. Servo motor control precision automatic pressure, automatic thickness measurement device, and connected to the computer to achieve automatic control. The instrument adopts 6-point temperature gradient detection to improve the test accuracy. A thermal protection device (thermal protection of the sample) is added around the test rod in the test head to reduce the influence of ambient temperature on the test. Thermal resistance curves under different pressures can be detected, and multiple parameters such as thermal conductivity, thermal resistance and contact thermal resistance at the interface can be measured by using optimized mathematical models. Using the latest technology cold end temperature automatic compensation, no longer need to add ice water compensation device.

Widely used in colleges and universities, scientific research units, quality inspection departments and production plants of material thermal analysis and detection.

Product Parameters

 substrate thermal conductivity tester thin thermal conductors thermal resistance tester ASTM D5470
2. Product Parameter

 

sample size	Φ30mm or 20x20mm (standard configuration), other sizes can be customized;
thermal conductivity test range	0.001 ~ 50W/m.k, 0.001 ~ 300W/m.k, computer software automatic switching range;
thermal resistance test range	0.05 ~ 0.000005m2.K/W
sample thickness	0.001 ~ 50mm (standard configuration), typical thickness: 0.02 ~ 20mm
thermal pole temperature control range	room temperature ~ 100ºC (standard configuration), room temperature ~ 299.99ºC, room temperature ~ 500ºC, temperature control accuracy 0.01ºC;
cold pole temperature control range:	0 ~ 99.00ºC, temperature control accuracy 0.01ºC (equipped with high precision, large capacity low temperature sink)
pressure measurement range:	0 ~ 1000N, servo motor control, can accurately set the pressure value, the control accuracy of 0.11N
thickness measurement range:	0 ~ 50.00mm, accuracy 0.1um, automatic thickness measurement;
Number of samples:	1 piece (multiple films). 10, test accuracy: better than 3%
Experimental methods:	thermal resistance test under different pressures of samples, thermal conductivity test of materials, contact thermal resistance test, aging reliability test, compression performance test of materials, contact thermal resistance test between samples
power supply	220V/50Hz 500W

computer automatic test, and realize data printing output

DRL-V table thermal conductivity tester thermal resistance tester ASTM D5470
3. Typical test materials

1, metal materials, stainless steel;
2, heat conduction silicone grease;

3, thermal conductivity silicone pad;
4. Thermal engineering plastics;

5, thermal tape (the sample is very thin and sticky, it is difficult to make a regular single sample, one side is fixed with transparent plastic and the other side is fixed with paper);

6, aluminum substrate, copper clad plate;
7, quartz glass, composite ceramics;

8, copper foam, graphite paper, graphite sheet and other new materials.

DRL-V table thermal conductivity tester thermal resistance tester ASTM D5470
4.complete set

1. One host computer;

2. A set of analysis software (Chinese and English versions);

3, HX-1005 precision low temperature constant temperature tank one (temperature control accuracy 0.01ºC);

4, a Lenovo computer (users can choose);

5. Two standard samples;

6, a set of random accessories (fat, paste, powder test box, sample convenient sheet forming stamping die each set).

DRL-V table thermal conductivity tester thermal resistance tester ASTM D5470
5. Dimensions and weight

1, the main machine: (length × width × height) 500×400×780mm, net weight: 60Kg;

2, precision low temperature constant temperature tank: (length × width × height) 300×350×530mm, net weight: 35Kg

DRL-V table thermal conductivity tester thermal resistance tester ASTM D5470
6. Technical services

1, one year free warranty, long-term technical services, software lifetime free upgrade.

2. Free on-site installation and debugging throughout the country. All over the country has the company's mobile technical personnel, can provide technical services.
 

Detailed Photos