| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IEC61032 IEC950 IEC60335 Probe B Test Finger Test standard
According to GB4706, GB2099, GB4943, GB/ t4208-2008ip2, GB3883 figure 1, IEC61032:1997 figure 2 test fixture B, IEC950 figure 2A, IEC60884, IEC60335, GB/T16842 test fixture B, UL507, EN60529 figure 1, UL1278 figure 8.4 standard model requirements design and manufacture.A protective test to prevent finger contact or electric shock.
IEC61032 IEC950 IEC60335 Probe B Test Finger Technical Parameters:
|
1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm |
IEC61032,Test Probe 11/Test finger
The Test Probe 11| was directed directly at the |11 Probe
Basic introduction:
1. According to the corresponding provisions of GB4706.1, GB/T16842, GB2099.1 and relevant IEC61032,UL, etc.
2. The test points out that it is a necessary appliance for the test of electric shock protection of household and similar electrical appliances.
Test refers to the method of use
1. With a power supply of not less than 40V and not more than 50V, connect one end of the power supply in series with a bulb and a wire of test finger (or pin or rod), and the other end is connected with the tested sample;
2. If the test finger (or pin or rod) is in contact with the tested sample according to the provisions, the bulb is not lit up to the standard, otherwise it is
qualified.
IEC61032 NO 18 NO 19 Child Test finger
Test set 18|18 children test finger
Basic introduction:
1, according to the corresponding provisions of gb4706.21-2008, iec61032-1997 and UL.
2. Children's test bent finger (test probe no. 18) is a necessary appliance for household and similar electrical appliances to conduct electric shock protection test.
IEC61032 NO 18 NO 19 Child Test finger
Technical parameters:
1. Bent finger diameter: 8.6mm
2. Head radius: 4.3mm
3. Total length of fingers bent: 57.9mm (three sections, 19.3mm each)
4. Diameter of the first handle: 38.4mm
5. Length of the first handle: 101.6mm
6. Diameter of the second handle: 38.1mm
7. Length of the second handle: 451.6mm
8. Reference standard: iec61032:1997 figure 12, gb4706.21-2008
Test subjects were 19 |19 children
Basic introduction:
1, according to the corresponding provisions of GB4706.1, iec61032-1997 and UL.
2. No. 19 children's test bent finger (no. 19 test probe) is a necessary appliance for household and similar electrical appliances to conduct electric shock protection test.
IEC61032 NO 18 NO 19 Child Test finger
Technical parameters:
1. Bent finger diameter: 5.6mm
2. Head radius: 2.8mm
3. Total length of fingers: 44mm (total length of three sections)
4. Diameter of the first handle: 25.9mm
5. Length of the first handle: 101.6mm
6. Diameter of the second handle: 25.4mm
7. Length of the second handle: 464.3m
8. Reference standard: IEC61032
){kind=link}