Touched Screen Melt Flow Indexer Mfi Tester Laboratory Mfr Mvr Melt Index Tester Price

• Customization: Available
• After-sales Service: Online Support
• Warranty: 1year
• Model NO.: LR-A001-B
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Melt Flow Indexer
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Touch Screen
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: No
• Model: Lr-A001-B
• Standard: ISO1133 ASTM D1238
• Temperature Range: Room Temperature~450degree Centigrade
• Temperature Fluctuation: ±0.2 ºC
• Test Methods: Mfr+Mvr Methods
• Transport Package: Plywood Box
• Trademark: lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200PCS/Month

Product Description

Touched Screen Melt Flow Indexer MFI tester Laboratory MFR MVR Melt index tester Price
Description:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.

Touched Screen Melt Flow Indexer MFI tester Laboratory MFR MVR Melt index tester Price
Standard:
GB/T3682-2000 Determination of melt flow rate and melt volume flow rate of thermoplastics
ISO 1133:1997 Determination of melt flow rate and melt volume flow rate of thermoplastics
ASTM D1238 Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer

Test Methods:MFR+MVR Methods
Display mode: 7-inch touch screen controller


Touched Screen Melt Flow Indexer MFI tester Laboratory MFR MVR Melt index tester Price
Product Character:
1.English LCD Touched Screen.Ø
2.Hand and Automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
5. Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
8.Have USB connector,can connect computer.

Touched Screen Melt Flow Indexer MFI tester Laboratory MFR MVR Melt index tester Price
Specification

 

Model	LR-A001-B
Loading Barrel parameters	Inner hole Φ9.550±0.025mm
Cylinder diameter	Φ2.095±0.005mm
Outlet length	8.000±0.025mm
Temperature range	Room Temperature~450ºC
Temperature fluctuation	±0.2 ºC
Temperature uniformity	±1ºC
Temperature display resolution	0.1ºC
Display resolution	0.1ºC
Time display resolution	0.1s
Displacement accuracy	0.001mm
Volume timing accuracy	0.001s
Testing scope of mass method	0.1-150g/10min
Range of test results by volumetric method	50-5000cm³/10min
Weight parameters are as follows:
Weight accuracy	±0.5%
Basic configuration	A    0.325kg
	B    1.2kg
	C    2.16kg
	D    3.8kg
	E     5kg
	F     10kg
	G    12.5kg
	H     21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min.
Material be installed	1 min.
Material sample temperature recovery time	4 min.
When binder set	1min
Output mode	Micro-automatic print output
Cut material methods	Hand and Automatic Cut
Test load	Eight sets of weights
Power	AC220V±10%   50/60HZ

Accessories List

No	Name	Qty	Remark
1	Weight	1 set	0.325kg,0.875kg,1.835kg,2.5kg,2.915kg,3.475kg,4.615kg,5.0kg
2	Weight tray	1pcs	Within level 1 load
3	Charging hopper	1pcs
4	Mouth mold cleaning rod	1pcs
5	Charging bar	1pcs
6	Cylinder cleaning rod	1pcs
7	piston rod	1pcs
8	mouth mold	1pcs
9	gauze	2roll
10	Print paper	2 roll

Standard test force(8 level)
1  level:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
   2  level:1.200 kg=(0.325+No2  0.875 weight)=11.77 N
   3  level:2.160 kg=(0.325+No3  1.835 Weight)=21.18 N
   4  Level:3.800 kg=(0.325+No4  3.475Weight)=37.26 N
   5  Level:5.000 kg=(0.325+No.5  4.675Weight)=49.03 N
   6  Level:10.000 kg=(0.325+No.5  4.675weight+No.6 5.000Weight)=98.07 N
   7  Level:12.000 kg=(0.325+No.5  4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
   8  level:21.600 kg=(0.325+No.2  0.875weight+No3. 1.835+No.4
 3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82