Crf61006A/B-PC System of Conductive Disturbance Immunity Based on RF Field Induction IEC61000-4-6

• After-sales Service: Online
• Warranty: 1 Year
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Display: Digital
• Model NO.: CRF61006A/B-PC
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Amplifier Power: 80W
• Frequency: Frequency
• Outgoing Level: -60-10dBm
• Frequency Resolution: 0.23Hz
• Transport Package: Plywood Cases
• Trademark: LONROY
• Origin: Guangdong
• HS Code: 9024800000
• Production Capacity: 200

Product Description

CRF61006A/B-PC The Test System of Conductive Disturbance Immunity Based On RF Field Induction IEC61000-4-6
Product Overview:
The conducted disturbance immunity test system is about the conduction immunity requirements of electrical and electronic equipment from the electromagnetic harassment of radio frequency transmitter in the frequency range of 150kHz ~ 230MHz. The equipment is coupled with the radio frequency field through at least one connecting cable (such as power line, signal line, ground wire, etc.). It is a common reference for evaluating the immunity performance of electronic and electrical equipment subjected to conductive disturbance induced by radio frequency field. Products fully comply with IEC61000-4-6 and GB/T17626.6 standard requirements.

 

CRF61006A/B-PC The Test System of Conductive Disturbance Immunity Based On RF Field Induction IEC61000-4-6

Product features:

1. According to strict international standards, can be completely automatic anti-interference testing system

2. The system can be fully expanded to meet the future standards, support various types of generators,Power meter, CDNS and absorption forceps

3. All parameters can be created on the computer and converted to CIT-10.In this mode of operation, the user changes the operating parameters of the generator,You can start, stop, pause, or continue testing

4. All parameters set can be saved in a file and can be called up whenever necessary

5. The Settings menu allows users to test, calibrate, use modulation, or use multiple scansmode

6. After the test, the user can print the report or save it in the document

CRF61006A/B-PC The Test System of Conductive Disturbance Immunity Based On RF Field Induction IEC61000-4-6
 

Parameter requirement
Model	CRF61006A-PC	CRF61006B-PC
Amplifier Power	80W	35W
output impedance	50Ω
voltage standing wave ratio	≤1.2
signal source
frequency	9k-3GHz
outgoing level	-60-10dBm
Unmodulated signal	CW(continuous wave)
frequency resolution	0.23Hz
Frequency temperature stability	±0.5ppm
harmonic	≤-30dBc
anharmonic wave	≤-50dBc
Output power range	-120dBm~0dBm (9kHz~500kHz); -120dBm~+10dBm(500kHz~3GHz)
Power accuracy	±1.0dB
resolution ratio	0.1dB
Internal modulation source (LF)	Sinusoidal wave 0.1Hz~500kHz; Square wave 0.1Hz~20kHz; Triangular wave/sawtooth wave 0.1Hz~100kHz
Amplitude modulation (AM)	modulation depth  0%~100% ;
Frequency modulation (FM)	modulation rate 1Hz~25KHz
Phase adjustment (diameter M)	Continuous phase modulation  0°~360°;
duty cycle	1-100%
output interface	N (female)
power amplifier
output frequency	150kHz-230MHz
maximum power output	+44dBm/80W
harmonic	<15dBc
gain	51dB±1 dB (100W)
VSWR	<1.5:1
output impedance	50Ω
output interface	N (female)
Power meter (built-in three-channel)
incoming frequency	9kHz-3GHz
Measuring Level	-40 dBm~+30dBm;voltmeter :-40 dBm~+30dBm
accuracy	±0. 5dB
input interface	N(female)
VSWR	<1.1:1
CDN coupling decoupling network accessories optional
power cord	M1,M2,M2,M3,M2+M3,M4,M5 Meet the requirements of single-phase/three-phase power supply, maximum current 16A/32A
Unshielded balance line	T2,T4,T8
Unshielded non-balanced line	AF2,AF4,AF8
Series shielded cable	S1,S1/75,S2,S4,S9,S25
else	RJ11,RJ11S,RJ45,RJ45S,USB-C,USB-P
Accessories of current injection pliers optional
Injection power	Maximum injection power 100W (5 minutes)
injected frequency	150kHz~400MHz
Decoupling coefficient	The decoupling direction coefficient is greater than 10dB and greater than 10MHz
Overall system configuration
software	Built-in 10.1 inch industrial computer Windows test system
control interface	USB
output interface	N-type joint
Size of Host Machine	480*500*175mm
power supply	AC 220V±20%
weight	15Kg