| Customization: | Available |
|---|---|
| After-sales Service: | Online After-Sales Service |
| Power Supply: | 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Table type xenon lamp aging test chamber | |
|
Xenon lamp test chamber adopts xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves in different environments, which can provide the corresponding environmental simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test chamber can be used for selecting new materials, improving existing materials or evaluating the durability of changes in material composition. It can well simulate the changes of materials exposed to sunlight under different environmental conditions. |
| Product feature | Full spectrum xenon lamp. Test chamber air temperature control system. Flat product rack for easy placement of products Xenon arc lamp originally imported from the United States. It is easy to install and easy to use and basically does not require routine maintenance. The service life of xenon arc tubes depends on the level of irradiance used, and the life of general tubes is 1600 hours. Easy tube replacement, long - lasting screening program to maintain the required spectrum of assurance. The latest air-cooled xenon lamp, to solve the problem of high failure rate of water-cooled xenon lamp cooling mode, convenient for users to replace the lamp tube; Simple and convenient maintenance |
| Desktop Xenon Arc Lamp Accelerated UV Aging Test Chamber Technical specifications and parameters: |
|
| Inside idimensions w×d×h | W400*D320*H300 |
|
|
| Temperature range | 65~90ºC adjustable |
| Temperature fluctuation | ±0.5ºC |
| Sample tray: | 380*300mm |
| Glass window filter: | 1 piece |
| Type of light source: | Imported air-cooled full-solar spectrum-long arc xenon lamp (average service life is about 1600 hours) |
| Spectral wavelength | 290nm~800nm |
| Xenon lamp power: | 1 piece,1800W (Life: 1600 hours) |
| Xenon lamp quantity: | 1 piece |
| Heating power | 1KW |
| Irradiance of light source: | 290nm~800nm,100~550w/m2 optional 340NM/420NM/290NM/300NM |
| Distance between sample stand and lamp: | 230~280mm |
| Irradiation area: | 1200mm2 (400*300) |
| Blackboard temperature: | 60~110ºC ±3ºC |
| Wave length | 290~800nm |
| Circuit control system: | |
| Control system | The xenon lamp weather test chamber has a variety of loop program, blackboard temperature and test chamber air temperature to choose from, and used for programming to simulate different operating environments. Temperature by microcomputer automatic calculation, PID self-setting function, touch screen temperature controller control, easy to operate, fast. The time can be divided into total time and illumination time respectively. After the setting, the device will automatically run according to the program input. The light irradiance displays the current light irradiation intensity at any time. The equipment will automatically stop the test when abnormal occurs during the test or after the test is over. |
| Temperature controller | "TIMI" temperature controller imported from Korea |
|
|
| Resolution: | ±0.1ºC |
| Temperature sensing device: | PT100 platinum resistance temperature measuring body; |
| Control mode | Heat balance temperature and humidity regulation mode; All electrical appliances are high-end products |
| Temperature control | Adopt P. I. D+S.S.R system to coordinate with the channel control; With the function of automatic calculation, the temperature and humidity change conditions can be corrected immediately, so that the temperature and humidity control more accurate and stable. |
| Equipment use conditions: | |
| 1. Environment temperature: | 5ºC~+28ºC(The average temperature within 24 hours is less than or equal to 28 ° C); |
| 2. Environment humidity | ≤85%; |
| 3. Power requirement | AC 380( ±10%)V/50HZ Three phase five wire system; |
| 4. Fluorine production electrolytic cells | 4.5KW. |
| Desktop Xenon Arc Lamp Accelerated UV Aging Test Chamber Spare parts and technical data: |
|
| 1. Provide spare parts (wearing parts) necessary for the safe, stable and reliable operation of the equipment during the warranty period. | |
| 2. Provide the qualification certificate, warranty card, operation and use manual of the equipment, manual of the main accessories delivered with the equipment, packing list, detail list of spare parts electrical schematic diagram, spare parts of wearing parts, and other relevant information required by the buyer for the correct use and maintenance of the equipment. | |
){kind=link}