| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Automatic water injection insulated boots insulating gloves withstand voltage tester
Product overview
The automatic insulated boot and glove pressure tester is developed and produced on the basis of the national standard DL/T1476-2015 "Preventive Test Regulations for Electric Power Safety equipment". All the indicators of this product meet the requirements of the national standard. Intelligent insulation voltage withstand test can be carried out on insulation shoes, insulation gloves and other safety appliances according to the requirements of the Regulations. The resistance test period of insulation shoes and insulation gloves is half a year. No breakdown is allowed during the test, and the leakage current of insulation shoes and insulation gloves is not greater than the limit value. The products are suitable for power related industries.
Automatic water injection insulated boots insulating gloves withstand voltage tester
Product characteristics
1. The instrument can test 6 insulated boots or gloves at the same time, and measure the leakage current of each test product.
2. The insulating shoe test adopts the dry test method of placing small steel balls inside, which gets rid of the traditional practice of filling the shoes with water to do the test, and it is not easy to dry after the test. Gloves test using water injection test method, the equipment can automatically water gloves, test personnel only need to install the gloves according to the requirements, improve work efficiency.
3. The measured voltage and measured current are compared in real time with high and low voltage to ensure the accuracy of the measured voltage and current value.
4. High and low voltage separation, leakage current is transmitted back to the control box using anti-interference wireless transmission technology to protect personal safety.
5. Each test has a breaking mechanism, when one of them breaks down or exceeds the set leakage current value, the test will automatically leave the test, does not affect other tests.
6. The instrument uses a large screen LCD Chinese character display, display a large amount of information, a screen at the same time display test voltage,
8 high-voltage leakage current, perpetual calendar, timing time and other parameters as well as Chinese character prompt content.
7. High fineness stepper motor is used to control the booster process of the voltage regulator, and the voltage resistance test is carried out automatically. After the start of the test, the instrument automatically closes and automatically increases the voltage according to the national standard. When the preset voltage is reached, the timing starts, the test voltage is maintained, and the voltage is automatically reduced. After reaching zero, the power is automatically cut off, indicating the end of the test, and the leakage current of each test product is displayed.
8. The insulation shoe test has a special metal grounding tray, and the insulation glove test has a special container, which is easy to operate.
9. The ratio of the test transformer can be set freely and can be matched with the existing transformer of the customer 10. With overcurrent protection function.
Automatic water injection insulated boots insulating gloves withstand voltage tester
|
Control box power input voltage |
220V±10%50Hz |
|
Test bench power input voltage |
220V±10%50Hz |
|
Control box output voltage
|
0-250V |
|
Control box output current |
25A |
|
Rated output voltage |
50KV |
|
Rated output capacity |
5KVA |
|
Leakage current indicates the maximum range of the meter head |
30mA |
|
Leakage current with trip system back range |
≥30mA |
|
Voltage measurement error |
±1%+3words |
|
Testing machine shows partial power supply |
Battery DC12V |
|
Leakage current measurement error |
±1%+3words |
|
Leakage current resolution |
0.01mA |
|
Digital display timing |
9 minutes free setup |
|
Ambient temperature |
-10ºC-40ºC |
|
humidness |
≤90%RH, no condensation, instrument does not flicker |
|
Continuous running time |
≤30 minutes Interval |
|
Control box dimensions |
650mm×650mm×1050mm |
|
Dimensions of the testing machine |
2000mm×800mm×2000mm |
|
Control box weight (kg) |
20 |
|
Weight (kg) |
125 |
){kind=link}