| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KD2511N High precision DC low resistance tester/Micro ohmmeter/milliohm meter
KD2511N DC low resistance tester uses 32bits CPU and high-density SMD mounting process, with 0.05% resistance measurement accuracy and 1uΩ small resistance resolution, internal comparator allows users to set their own upper/lower limit reference comparison value. Up to 15 times per second test speed can significantly improve work efficiency, zero-free design in the small resistance test is more convenient to use, bright green LED digital tube to display four-and-a-half read value, can quickly and accurately measure the resistance of components or materials, its performance, easy to operate, beautiful appearance.
KD2511N DC low resistance tester can measure the object including cable node, relay contact resistance, connector resistance, wire resistance, printed board line and welding hole resistance, engine, transformer and generator coil resistance and so on;
KD2511N High precision DC low resistance tester/Micro ohmmeter/milliohm meter
Performance characteristics
1, 32-bit core processor, high measurement accuracy, good stability.
2, bright green LED digital tube display, four-and-a-half read value.
3, sorting results, test status, range intuitive display, clear and convenient.
4, accuracy: 0.1%.
5, 7 range automatic or manual test; 10uΩ-20KΩ test range.
6, basic zero base number, weak resistance test does not need to clear zero.
7, resistance small resolution 1uΩ.
6, test speed 15 times/second.
7, 3 file comparison function :1 file qualified, 1 file super upper limit, 1 file super lower limit.
8, a variety of trigger methods: internal trigger, external trigger and manual trigger.
9, HANDLER, RS232C, RS485 interface to achieve remote control.
10. Set data to be saved in real time.
KD2511N High precision DC low resistance tester/Micro ohmmeter/milliohm meter
|
Measuring function |
|
|
Test parameter |
DC resistance |
|
Test speed |
Fast :15 times/second; Slow :8 times/second |
|
Test end |
four ends |
|
Range switching |
Auto/lock |
|
Trigger mode |
internal/External/manual |
|
Zero clearing mode |
self-stabilized zero free zero clearing (zero can be cleared if necessary |
|
Resistance test |
|
|
Measuring range |
10uΩ-20KΩ |
|
Test accuracy |
≤20mΩ 0.2%; >20mΩ 0.1% |
|
Measurement mode |
|
|
Range |
7 range automatic/locking |
|
The result is displayed |
Direct read % sorting result |
|
Display |
High-lighted green LED digital tube displays four-and-a-half reading values |
|
Correction |
Short-circuit clearance in full range |
|
Comparator |
3 speed sorting |
|
Comparative discrimination |
|
|
Signal output |
superqualified and superqualified |
|
Ring |
Pass or fail to close |
|
Limit setting mode |
absolute upper/lower limit; Percentage upper/lower limit + nominal value |
|
Dimensions |
L x W x H :330mmx215mmx86mm |
|
Weight |
Net weight about 3.6KG |
){kind=link}