Customization: | Available |
---|---|
After-sales Service: | Online |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
KGXZ-B Generator Frequency Conversion Resonance Boost Device Cable Withstand Voltage Tester
Product Introduction
KGXZ-B generator frequency conversion resonance booster device can be used to adjust the inductance of the reactor to achieve the resonance state, can also be used to adjust the operating frequency of the system to achieve the resonance state, but also can be used at the same time to achieve the resonance state. When the required frequency is tested, the frequency of the excitation source is adjusted to the required frequency, and then the inductive reactance of the reactor is adjusted according to the capacitance of the subject, so that the system resonates and generates high voltage. In the process of boosting voltage, if the resonant point deviates, the resonant point can be accurately found by fine-tuning the frequency to ensure a high Q value. Thus, the power supply capacity and the volume weight of the test equipment are reduced to the greatest extent.
Generator AC voltage test requires the use of power frequency voltage, the national standard frequency of power frequency voltage is defined as 45Hz ~ 65Hz, but in many test occasions, the generator is required to carry out 50Hz± 2Hz AC test, and the generator stator winding to the ground power capacity is relatively large, most of the domestic test units use resonant transformers to test it. But the resonant transformer itself is very heavy, often tons, field test is very inconvenient. In view of this situation, an AC withstand voltage resonant booster device for frequency modulation and inductance modulation generator is designed and manufactured.
KGXZ-B Generator Frequency Conversion Resonance Boost Device Cable Withstand Voltage Tester
Product Parameters
1, rated output voltage: 0 ~ 50 kV (effective value) and below)
2, output frequency: 45 ~ 65Hz
3, resonant voltage waveform: pure sine wave, waveform distortion rate ≤1%
4, the maximum test capacity: 2000KVA and below
5, quality factor: 10 ~ 40
6, frequency adjustment sensitivity: 0.1HZ, instability < 0.05%
7, working system: full power output, a continuous working time of 60min
8, working power supply: 220V or 380V±15%/50HZ±5%
KGXZ-B Generator Frequency Conversion Resonance Boost Device Cable Withstand Voltage Tester
Product Characteristics
1, do the same voltage level, the same capacity of the generator AC voltage withstand test, the overall weight of the equipment is greatly reduced, and the weight of a single piece of equipment is less than 60 kg, completely solve the problem of on-site handling difficulties;
2, the whole set of device principle is advanced, while the application of new frequency modulation induction technology, strictly ensure the generator frequency voltage test requirements; Wide application range, greatly improve the use value of equipment;
3, the configuration of 20Hz-300Hz frequency conversion control source, its protection function is strong, the output waveform is good, good stability, with a variety of working modes, easy to operate, and the use of 220V or 380V two power supplies, convenient on-site power;
4, the first modulation after the frequency modulation mode can accurately find the maximum Q point, to avoid the resonance offset caused by voltage rise;
5, flexible configuration, strong expansion function. Different types of reactors can be selected or multi-section series and parallel mode can be adopted to meet the requirements of capacitive test of power system; At the same time, it can meet the need to work frequency test occasions, but also to meet the frequency conversion method to do the test occasion; The device can not only do alternating-voltage test of the generator, but also do the alternating-voltage test of the cable, realizing a multi-purpose machine and high cost performance.