| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ISO 8780-3 Mixing sand mill multipurpose machine
Use
Laboratory high shear emulsifying machine mixing, grinding, dispersion, dissolution, emulsification, homogeneous at an organic whole, is suitable for the laboratory of low, medium and high viscosity liquid and liquid, liquid and solid of emulsification and small batch processing.It has simple operation, convenient maintenance, high efficiency, etc, are widely used in paint, pharmaceutical, food, chemical industry, etc.
Working principle:
Generated by high speed rotating rotor under the action of strong centrifugal force, the material from the head area of the upper and lower feed work from the axial suction cavity at the same time.High-speed rotating rotor outer end high linear velocity, and the formation of strong mechanical and hydraulic shear layer, liquid friction, collision tear, full of material dispersion, emulsion, homogeneous, crushing, constantly high speed through the stator slot radial injection at the same time, under the resistance of the material itself and the vessel wall change flow direction, at the same time under the rotor area, under the action of axial force, forming the upper and lower two powerful 3 d turbulent flow.
Material after several cycles, and finally completing the process of dispersion, emulsion, homogeneous.
JSF-550 type mixing sanding dispersing machine, this product has the advantage of sanding/dispersing/stirring multiple functions in one.
The motor uses frequency conversion motor, no carbon brush, long service life, low noise, very suitable for use in the laboratory.
For ease of operation, the frequency converter is installed directly on the machine.The display screen of the converter directly shows the rotation speed of the shaft.
The machine is equipped with a variety of sand grinding disc, dispersing disc and stirring blade.Can adapt to different experimental needs.
ISO 8780-3 Mixing sand mill multipurpose machine
Test standard
GB/T 21868-3
ISO 8780-3
ISO 8780-3 Mixing sand mill multipurpose machine
Specification
|
Speed range |
0-10,000 RPM |
Stainless steel sandwich drum |
1.2L |
|
Model spec |
550W |
Diameter of dispersing disc |
50mm,60m each 1pcs |
|
lift up down methods |
spring/manual |
grinding disc size |
50mm,60m each 1pcs |
|
Lift up down stroke |
280mm |
mix capacity |
0-2L(water reference) |
|
Outside size |
450×420×550mm |
weight |
45 KGS |
1. High-speed motor 2. Lifting handle 3. Frequency converter
4. Lock plum handle 5. Gripper 6. Base
7. Cooling circulating water outlet of grinding barrel
8. Grinding barrel 9. Balance quincunx adjusting handle
10.Motor speed display 11. Speed control knob 12 start stop switch
){kind=link}