DRE-2C thermal conductivity measuring instrument Rapid thermal conductivity meter ISO22007

• Customization: Available
• After-sales Service: online
• Warranty: 1 year
• Model NO.: DRE-2C
• Type: thermal conductivity tester
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Case
• Specification: -20º C ~ 120º C
• Trademark: langshuo
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

DRE-2C  thermal conductivity measuring instrument Rapid thermal conductivity meter ISO22007
1.Product introduction
Thermal expansion coefficient meter sample range system measurement error
Use this test method to use the plate heat conductivity meter, the effect is better!
How should the manual measurement of heat storage coefficient tester be operated?
Fast hot wire method thermal conductivity tester in the measurement is how fast and accurate?
In detail
Rapid thermal conductivity meter (thermal conductivity measuring instrument)
Rapid thermal conductivity instrument using transient plane heat source method, this instrument is based on TPS transient plane heat source technology, using Hot Disk as the probe thermal conductivity measuring instrument.
The advantages of the Hot Disk method are:
1. Direct measurement of heat propagation can save a lot of time;
2. It will not be affected by the contact thermal resistance as the static method;
3. No special sample preparation is required, and only a relatively flat sample surface is required for solid materials. It has the advantages of fast measurement speed, wide application range and successfully avoiding the influence of natural convection in the experiment process, so it is a popular test method at present. Equipment reference standard: ISO 22007-2 2008. It is equipped with a special round sample cylinder for rock and soil measurement

Product Parameters

DRE-2C  thermal conductivity measuring instrument Rapid thermal conductivity meter ISO22007
2. Product Parameter

Thermal conductivity  measurement range	0.001 ~ 100W/m.k
Measurement time	1-60 seconds
Accuracy	better than 3%

Temperature range: standard measurement room temperature, (according to customer requirements can be equipped with a variety of temperature section of the test temperature, the cost of additional: such as -20ºC ~ 120ºC)
Sample size: more than 10mm high, more than 45mm diameter of the relatively flat sample surface;
 Instrument reference standard: ISO 22007-2008
Easy operation and fast test speed. Just clamp the test probe in the middle of two rock and soil sample blocks, and obtain the thermal conductivity of the test sample by simple software click operation
The whole process is completed automatically by the computer
Power supply: AC 220V±10%; 50/60 Hz, machine power: <500w.
The thermal conductivity of rock and soil (stone) can be measured by the transient plane heat source method, which is an accurate and rapid test method. Transient planar heat source method (TPS) is a test technology based on the principle of unsteady thermal conductivity. It is suitable for the thermal conductivity test of materials from insulation to high thermal conductivity.
This method has the following characteristics:
1.Direct measurement of heat propagation: saves a lot of time and is not affected by contact thermal resistance.
2. No special sample preparation: for solid materials, only a relatively flat sample surface can be tested.
3. Wide range of application: different types of materials can be used in different test schemes and calculation mathematical models, with fast measurement speed, can successfully avoid the impact of natural convection in the experimental process and other advantages.
4. Equipment reference standards: ISO22007-2:2008, GB/T32064-2015, etc., to ensure the standardization and accuracy of the test method.

Detailed Photos