Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ICP-7000 full spectrum direct reading inductively coupled plasma emission spectrometer
Description
ICP-7000 Sequential Inductively Coupled Plasma Emission Spectrometer is designed to measure major, minor and trace elements in various samples with outstanding performance.
It was widely chosen in different industries for its superior optical resolution, high level of automation, reliable free running RF system as well as excellent analytical precision and accuracy.
ICP-7000 was widely applied in various fields ranging from rare earth, geology, metallurgy, chemistry, environmental protection, clinical medicine, petroleum products, semiconductors, foods, biological samples, criminal science, to agricultural research, etc.
Feature
1.Over 70 elements can be measured
2.Excellent detection limits, at ppb level for most elements
3.Wide linear dynamic range
4.Lower gas consumption
5.Advanced optical design with a fully illuminated holographic grating, with spectral interference 6.correction and high light throughput for improved detection limits
7.Enhanced database management
Applications
The ICP-7000 full spectrum direct reading inductively coupled plasma emission spectrometer is a high-performance full spectrum direct reading ICP spectrometer used to determine the content of constant, trace, and trace elements in different substances. It can be used for qualitative, semi quantitative, and precise quantitative analysis of elements in samples, with a detection limit of up to one billionth.
ICP-7000 full spectrum direct reading inductively coupled plasma emission spectrometer
Product Parameter
Detector | CMOS detector from Japan |
Frequency | 27.12MHz |
Frequency Stability | <0.05% |
Induction Coil | ID 25mm×3, high frequency coil coated with Silver |
Three Concentric Quartz Torch Tubes | Optional |
Peristaltic Pump | 4 channels, 12 roller, speed can be adjusted |
Wavelength Range | 165nm-900nm |
Resolution | <7pm-200nm |
Optical Temperature | 34°C±0.1°C |
Repeatability | short-term stability RSD<0.5% |
Stability | RSD<1% within 2 hours |
Testing Speed | Single CMOS within 2ms |
Limits of Detection (LOD) | for typical elements 1ppb-10ppb( μg/L) |
General Argon Consumption | Less than 16L /min |
Main Power Supply | AC220V/20A |
Output Power | 800W ~1600W |
Size | 1380*836*740mm(LxWxH) |