Kg10y-15-150 Sf6 Gas Recovery Unit Gas Vacuuming Recovery Tester and Refilling Device

• After-sales Service: Online
• Warranty: 1 Year
• Type: Gas Vacuuming Recovery Tester
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Model NO.: KG10Y-15-150
• Display: Digital
• Control: Manual Control
• Weight: 800
• Power Source: AC220V
• Power Supply: AC 380V
• Unit Annual Air Leakage Rate: <1%
• Cumulative Trouble-Free Running Time: ≥5000h
• Actual Liquid Storage Capacity: 150kg
• Transport Package: Plywood Cases
• Specification: 160*100*155CM
• Trademark: LONROY
• Origin: Guangdong
• HS Code: 9024800000
• Production Capacity: 200

Product Description

KG10Y-15-150 SF6 Gas Recovery Unit Gas Vacuuming Recovery Tester And Refilling Device

Product Introduction

The basic working principle of the KG10Y-15-150 SF6 gas recovery device is the use of freezing liquefaction method. During recovery, the suction and compressibility of the compressor are used to suction SF6 gas at a certain pressure in the SF6 electrical equipment into the compressor and compress it to a higher pressure. At the same time, the low evaporation temperature characteristic of R22 refrigerant is used to cool the SF6 gas at a higher temperature to the condensing temperature for liquefaction and storage. In this way, the SF6 compressor is continuously pumped to run in series until the final recovery pressure is reached.
KG10Y-15-150 SF6 gas recovery system is more complex, by the vacuum pump, SF6 compressor, refrigeration system, storage containers, pipelines, various valves, instruments and other accessories. The use of hand-pushed mobile, can adapt to indoor and outdoor normal environmental conditions.
KG10Y-15-150 SF6 Gas recovery unit A special device for recovering and charging SF6 gas for the manufacture and maintenance of SF6 electrical equipment. With recovery, charging and discharging, purification, vacuuming, storage, bottle filling and other comprehensive functions, the system is relatively complete.

 

KG10Y-15-150 SF6 Gas Recovery Unit Gas Vacuuming Recovery Tester And Refilling Device

Product name:
SF6 gas recovery device, portable SF6(sulfur hexafluoride) gas recovery device, sf6 gas recovery device, sf6 gas recovery equipment, sf6 gas recovery truck, sf6 gas recovery charging and discharging device, sf6 recovery and purification device, sf6 portable recovery device, sf6 recovery device, sf6 gas recovery and inflating device, sf6 gas recovery and recycling device Purification system, sf6 recovery instrument, sf6 recovery equipment, sf6 gas recovery and purification, sf6 gas pumping device, sf6 gas charging and recovery device, sf6 gas recovery instrument, sf6 recovery device price, sf6 gas liquid recovery device, sf6 gas recovery device price, sf6 gas recovery and purification device price, sf6 gas recovery and purification device price Device, sf6 gas recovery and purification charging and discharging device, sf6 gas recovery and purification device, sf6 gas recovery device, sf6 gas recovery and charging device, sulfur hexafluoride recovery device, sulfur hexafluoride gas recovery device

 

KG10Y-15-150 SF6 Gas Recovery Unit Gas Vacuuming Recovery Tester And Refilling Device

Product Parameters
1. Recycling
Initial recovery pressure ≤0.8MPa
Final recovery pressure ≤50KPa
Recovery time: For 1 m3 SF6 gas volume with initial pressure of 0.8MPa, recovery to the final pressure of 50KPa, the recovery time is less than 2.5 hours.
2. Aeration
1 m3 SF6 gas volume with initial pressure of 133Pa is charged to 0.8mpa, and the charging time is less than 0.8 hours.
3. Vacuum
The limit vacuum degree of the device is less than or equal to 10 Pa, and the time required to vacuum the 1 m3 SF6 gas volume with an initial pressure of 0.1MPa to 133Pa is less than 1.0 hours. The vacuum pumping rate is 54m3/h
4. Storage
The storage vessel volume is 0.05m3, the nominal liquid storage capacity is 150kg, and the maximum storage pressure is 3.8MPa
5. Purification
For SF6 gas with water content below 1000PPM (volume ratio), after recovery and purification by the device, the water content is less than 60PPM (weight ratio), and the oil content is less than 10PPM (weight ratio).
6, annual leakage rate ≤1% nominal storage

7, noise ≤75dB(A) sound pressure level
8, working environment temperature -10° -40 ° C
9, power ≤7KW
10, Power supply: AC three-phase five-wire system 50HZ 380V±10%
11, weight about 800 kg
12, overall size (length × width × height) : 1600×1000×1550

13,Various technical parameters:

serial number	Indicator name and unit		KG10Y-15-150
1	power supply AC	V	380
2	Rated maximum gas storage pressure(20ºC)	MPa	≥4
3	final vacuum	Pa	≤10
4	Device vacuum maintenance	Pa	At 133 Pa pressure held for 24 hours, the vacuum value rose < 400 Pa
5	Compressor pumping rate	m3/h	French Meyoule 10m3/h compressor
6	Vacuum pump pumping rate	m3/h	Domestic bipolar pump 54m3 /h = 15L/S
7	Recovery device ADAPTS to inlet initial pressure (20ºC)	MPa	0~0.8
8	Final pressure of electrical equipment recovery (20ºC)	MPa	≤50 Kpa
9	Gas oil control after recovery	μg/g	Domestic oil content<10
10	Unit annual air leakage rate	%	<1
11	Continuous trouble-free operation time of the device	h	≥1000
12	Cumulative trouble-free running time	h	≥5000
13	noise level	dB(A)	complete machine≤75
14	Actual liquid storage capacity	KG	150
15	Storage form		liquid state
17	refrigerated storage tank	KG	50
18	Recovered gas moisture(PPM/V)	PPM/V	60
19	Recovered gas oil content (PPM/V)	PPM/V	60
20	Dry filtration system		Vacuum heating activation regeneration
21	Initial gas pressure(pa)	pa	≤133
22	Charging final pressure(mpa)	mpa	0.8
23	inflation rate	m3/h	≥5
24	gasification mode		Electric heating automatic temperature control

 

KG10Y-15-150 SF6 Gas Recovery Unit Gas Vacuuming Recovery Tester And Refilling Device

Product Characteristics
1, KG10Y-15-150 SF6 gas recovery charging and discharging device with recovery, charging and discharging, purification, vacuuming, storage, bottle filling and other comprehensive functions, the system is relatively complete. The series or switching of each function is mainly accomplished through the operation of the electric control box and the ball valve on one side of the panel.
2, the system is equipped with three oil separators, respectively installed in the vacuum pump outlet and compressor outlet two, in order to effectively remove the SF6 gas carried by the oil.
3, the system loop is provided with a filter dryer to ensure the purity of SF6 into the storage container and effectively remove water. The filter has a heating regeneration device, which can be heated and regenerated under vacuum, so that the molecular sieve can be used repeatedly.
4, the system is equipped with a reliable safety protection device, high pressure pressure controller installed in the SF6 compressor exhaust port, once the exhaust pressure exceeds the limit value it will automatically stop the compressor work, and then restart the compressor after the pressure drops; The safety valve is installed on the storage container. Once the overpressure safety valve automatically opens to discharge gas, it automatically closes after the pressure drops.
5, the system is also set up a total of seven monitoring instruments and control instruments, including a vacuum gauge, installed in the device recovery inlet, and installed in front of the vacuum gauge DN8 valve, need to be opened when observation; Five pressure gauges, respectively installed on the recovery air inlet, SF6 compressor exhaust port, refrigerant compressor suction and exhaust port and storage container; A thermometer is installed on the refrigeration system and the SF6 liquid temperature is sensed by the temperature envelope.
6. True in the system

7, the refrigeration system in the system by the high and low pressure controller to adjust the inlet and outlet pressure of the refrigeration compressor. Once the refrigerant compressor exceeds the limit range, the compressor automatically cuts off the work. When the low pressure is disconnected, wait for the pressure to rise, or when the high pressure is disconnected, wait for the pressure to fall, and then restart the compressor.
8, the overall structure, the device adopts hand-propelled mobile, can adapt to indoor and outdoor normal environmental conditions.
9. The system of this device is more complex, consisting of vacuum pump, SF6 compressor, freezing system, storage container, pipeline, various valves, instruments and other accessories.
10, the electric control box, operating valves and monitoring instruments are all concentrated on one side panel and have process instructions, so it is easy to use.