DRM-II Thermal conductivity measuring instrument non-steady state method conductometer

• Customization: Available
• After-sales Service: online
• Warranty: 1 year
• Model NO.: DRM-II
• Type: thermal conductivity tester
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Case
• Specification: 20× 20× (1.5 ~ 3) cm
• Trademark: langshuo
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

DRM-II Thermal conductivity measuring instrument non-steady state method conductometer
1.Product introduction
The characteristics of the instrument are: simple device, high accuracy, fast test speed (a test of about ten minutes), in a test can be measured at the same time the thermal conductivity of the material, heat storage coefficient, thermal conductivity coefficient and specific heat, and can measure the thermal physical properties of different wet state. Reference standard: JGJ/T12-2019(technical specification for lightweight aggregate concrete) and JG158-2004 "rubber powder polystyrene particle external wall insulation system" and JG/T283-2010 "expansion glass beads lightweight mortar" Appendix B determination of heat storage coefficient. Suitable for insulation materials, concrete materials, plastic, rubber, graphite and other inorganic materials detection.

Product Parameters

DRM-II Thermal conductivity measuring instrument non-steady state method conductometer
2. Product Parameter

 

Application scope	used to determine the thermal conductivity, thermal storage coefficient, thermal conductivity coefficient and specific heat of homogeneous plate, gel, powder and granular materials under dry or different wet conditions. The thermal conductivity of the measured material ranges from 0.001 to 10w/m.k, and the thermal storage coefficient ranges from 0.1-100W/m2K.
Sample size	The thin specimen was 20×20× (1.5 ~ 3) cm Two thick specimens were 20×20× (4 ~ 10) cm
power supply	220V, 50HZ.
Working conditions	Ambient temperature: 10 ~ 35ºC Relative humidity: ≤80%
Accuracy of measurement results	±3% computer automatic testing, data printing output

DRM-II Thermal conductivity measuring instrument non-steady state method conductometer
3. Basic principles
DRM type thermal conductivity measuring instrument is based on the principle of non-stable thermal conductivity, heating in the experimental material for a short time, so that the temperature of the experimental material changes, according to the characteristics of its change, through the solution of the thermal conductivity differential equation, you can calculate the thermal conductivity coefficient, thermal conductivity coefficient and specific heat of the test material.

Detailed Photos