| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FO9424 Dust Particle Size Distribution Tester Spray Particle Size Analyzer 0.1um-1200um
Features:
The percentage of the total amount of particles in different particle size intervals determined by a specific method is called the particle size distribution, and some users also call it the particle size distribution. Particle size distribution (particle size distribution) has a variety of benchmarks, such as quantity distribution, length distribution, surface area distribution, volume distribution, etc., different units of measurement will cause great changes in the form of particle size distribution (particle size distribution) results.
The size distribution is usually given in the form of a size distribution table or/and a size distribution curve. (1) Table form: All particle size intervals and their corresponding percentage of content are listed in the table, with differential distribution and cumulative distribution in two forms. (2) Curve form: Particle size distribution curve is an image expression of particle size distribution. Compared with the grain size distribution table, the curve has the advantages of image, intuition and clear glance. The particle size distribution curve is also divided into differential distribution curve and cumulative distribution curve, which has the same physical meaning as the particle size distribution table.
FO9424 Dust Particle Size Distribution Tester Spray Particle Size Analyzer 0.1um-1200um
Determination procedure
1. Turn on the power supply of the particle size analyzer (hereinafter referred to as the instrument) and preheat for 15min.
2. According to the use procedure of the instrument, enter the true density of dust, the height of the liquid level, and the density and viscosity of the acetate at the measured temperature.
3. After the instrument prints out the input value, pour butyl acetate into the clean instrument measuring tank, and pour the amount of about 2/3 of the liquid level. Put the measuring tank containing butyl acetate into the measuring position of the instrument and adjust the zero control knob so that the optical density value displayed by the instrument is 0.0.
4. Put the dust-containing filter film into a clean porcelain crucible or beaker, drop 5~10mL butyl acetate and stir thoroughly with a glass rod. When stirring, the dust-containing liquid is dropped into the measuring tank containing butyl acetate with pipette, so that the liquid level reaches the input liquid level height scale line.
5. Replace butyl acetate with anhydrous ethanol for coal mine dust that is generally not taken on the filter membrane. The method is to take 3 ~ 5g dust on the white paper fully mixed evenly, with a horn spoon to take about 10mg of dust into a clean crucible or beaker, in accordance with the method described in Article 4.
6. Cover the measuring pool cover, hold the measuring pool tightly with your thumb and shake the cover fully, so that the dust in the measuring pool is evenly dispersed, and dry the liquid on the surface of the measuring pool with absorbent cotton gauze. Quickly put the measuring tank into the measuring position of the instrument, so that the optical density value displayed by the instrument is within the range of 90 to 100, and quickly press the measuring key to determine the dust powder distribution. If the optical density value initially displayed by the instrument is not in the range of 90 to 100, it means that the concentration of the suspension is too high or too low, and the dust concentration in the liquid needs to be re-adjusted.
7. After pressing the measurement key, the instrument begins to display the measurement time and the optical density value of the corresponding time at an interval of 0.5s. Press the following formula to calculate
FO9424 Dust Particle Size Distribution Tester Spray Particle Size Analyzer 0.1um-1200um
Parameter
| Item | index |
| principle of measurement | laser diffraction |
| optical model | Full range Mistral theory and Fraunhofer theory are optional |
| particle size range | 0.1μm-1200μm, no need to replace the lens, does not rely on standard sample calibration |
| detecting system | Includes a grille type large Angle, non-uniform cross area compensation detector array |
| measuring cell | Parallel slant |
| light source | 638nm solid-state laser with integrated thermostatic system, up to 20mW |
| Spatial filtering mode | Non-pinhole polarization filtering technology |
| Optical alignment system | Intelligent fully automatic |
| measuring time | Typical values are less than 10 seconds |
| measuring speed | Up to 20,000 times per second |
| degree of accuracy | Dv50 better than ±0.6% (NIST-Traceable latex standard) |
| degree of accuracy | Dv50 better than ±0.5% (NIST-Traceable latex standard) |
| laser safety | Class 1 laser products |
| computer configuration | Intel i5 processor,4GB RAM,250GB hard drive, mouse, keyboard and widescreen display |
| computer interface | USB2.0 or above |
| Software running platform | Windows7 or above Professional Edition |
| operating ambient temperature | 5ºC-40ºC |
| Operating ambient humidity | 10%-85% relative humidity (no condensation) |
| power requirement | Ac 220V, 50Hz-60Hz, standard ground |
| Optical system weight | 30kg |
| Optical system size | 670mm x 275mm x 320mm |
){kind=link}