| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM D6082 Lubricating Oils High Temperature Foam Stability Tester
Introduction
The A1082 high-temperature foam characteristic tester is suitable for testing the foam characteristics of lubricating oil at 150ºC. The sample is heated to 49ºC, held at this temperature for 30 minutes, then cooled to room temperature. The sample is then transferred to the specified graduated cylinder and heated to 150ºC. Dry air is introduced into the metal diffusion head for 5 minutes. The static foam volume, the moving foam volume, the static foam volume after a specified period of time after stopping the air supply, the time for foam disappearance, and the percentage increase in total volume are measured at the moment before the air supply stops.
Adaptation standards
ASTM D6082 SH/T0722
Instrument features
1.This instrument is of a split type, consisting of a heating bath and an accurate flow meter.
2. High-temperature resistant borosilicate glass cylinder, with a diameter of 300mm and a height of 450mm, meets the standard requirements.
3. Environmentally friendly oil bath heating reduces the harm caused by cooking fumes to the human body, and has excellent heat insulation properties.
4. Stainless steel heater.
5. Air filter, with glass wool.
ASTM D6082 Lubricating Oils High Temperature Foam Stability Tester
Product Parameter
|
Parameter Category |
Specific Parameters |
|
Temperature Control Method |
Temperature controlled by temperature controller |
|
Temperature Control Accuracy |
±0.1°C |
|
Heating Method |
Oil bath heating |
|
Overall Power |
2.5 kW |
|
Working Unit |
2 tubes |
|
Flow Control |
Precision flow meter |
|
Working Power Supply |
AC 220V / 50Hz |
|
Temperature Range |
150°C ± 0.1°C |
){kind=link}