| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KG-110B Line Parameter Fault Tester Transmission Line Test System Power Capacitance Test Set
Product Introduction
KG-110B line parameter tester is a high-precision test instrument for testing various high-voltage transmission line parameters in power stations, substations and other on-site or laboratory. The instrument is an integrated structure, built-in frequency conversion power module, variable frequency voltage control output power supply. The frequency can be changed to 45Hz or 55Hz, and digital filtering technology is adopted to avoid the interference of power frequency electric field on the test, and fundamentally solve the problem of accurate measurement under the strong electric field interference. At the same time, it is suitable for the test of generator power supply after all power failure.
KG-110B line parameter tester accurately measures the positive sequence capacitance, zero sequence capacitance, positive sequence impedance, zero sequence impedance, mutual inductance and coupling capacitance, and interphase capacitance of various high-voltage transmission lines.
In the traditional transmission line power frequency parameter test, it is necessary to use three-phase autovoltage regulator and large capacity isolation transformer to provide test power supply, through the power measurement of CT and PT for electrical signal conversion, with pointer type high-precision 3 voltmeter, 3 ammeter, 3 power meter, multiple readings to measure each electrical parameter, calculate the transmission line power frequency parameter test results. The whole set of test equipment is large in volume and weight, and it needs to work with the crane, which is not conducive to the field measurement. The KG-110B line parameter tester can replace the workload of the traditional transmission line frequency parameter test (20 hours) in a single machine (20 minutes), with high efficiency and accuracy!
KG-110B Line Parameter Fault Tester Transmission Line Test System Power Capacitance Test Set
Product Characteristics
1, can single output three-phase different frequency anti-interference test signal, measure 35 ~ 500 kV high voltage transmission line (overhead, cable, overhead cable mix, the same pole multiple erection) power frequency parameters.
2, can measure positive sequence capacitance, zero sequence capacitance; Positive sequence impedance, zero sequence impedance; Coupling capacitance, mutual inductance reactance; Induced voltage to earth.
3, can be single (20 minutes) to replace the traditional transmission line frequency parameter test (20 hours) of the workload, high efficiency and accuracy.
4. KG-110B line power frequency parameter test fully meets the requirements of the following procedures and standards for the power frequency parameter measurement project of overhead power lines:
DL/T 1119-2010 Transmission Line frequency parameter tester general technical conditions
Regulations for the Commencement and Acceptance of 110 kV and above Power Transmission and Transformation Capital Construction Projects
DL/T559-94 220-500kV Network Relay Protection Device Operation setting Rules
GB50150-2006 Electrical Equipment installation engineering Electrical equipment handover test Standard
KG-110B Line Parameter Fault Tester Transmission Line Test System Power Capacitance Test Set
| input power | Three-phase AC380V±10%, 50Hz | ||
| exportation Maximum voltage |
AC 200V accuracy: 1% | ||
| exportation Maximum current |
5A | ||
| Output signal frequency | 47.5Hz/52.5Hz;50Hz/50Hz | ||
| measuring range | Positive sequence capacitance Zero sequence capacitance Coupling capacitance |
Positive sequence impedance Zero-sequence impedance Mutual inductive reactance |
impedance angle |
| 0.1~50μF | 0.1~400Ω | 0~360° | |
| measurement resolution | 0.01μF | 0.01Ω | 0.01° |
| accuracy of measurement | 0.1μF~1μF ±3%±0.05μF 1μF~50μF ±1.5%±0.03μF |
0.1Ω~1Ω ±3%±0.05Ω 1Ω~400Ω ±3%±0.03Ω |
±0.2°(Voltage >1.0V) ±0.3°(Voltage>0.2~1.0V) |
| boundary dimension | 620 mm×500 mm×600mm (including wheels); Weight: 79kg | ||
| Anti-interference parameter | Interference voltage: longitudinal induced voltage < 350V after connecting the instrument to test the power supply; Interference current: < 40A when the first and last ends of the line are short-grounded; It can complete the test stably and accurately under the condition that the ratio of output signal and interference signal is 1:10. |
||
| service environment | Ambient temperature: -15 ºC ~ +40ºC Relative humidity: < 90% | ||
){kind=link}