SAC hammer tester+ sand injector measuring physical properties of cast sand (clay sand)
Used for the preparation of various standard samples and the determination of compactness required for the test of the physical properties of cast sand (clay sand).
SAC hammer tester+ sand injector measuring physical properties of cast sand (clay sand)
Technical parameter
| Weight of the hammer |
6670±10g |
| Weight falling height |
50±0.5mm |
| The number of hammer impact |
3 times |
| The work applied to the sample |
10J |
| Compaction rate range |
20-70% |
SAC hammer tester+ sand injector measuring physical properties of cast sand (clay sand)
SLT sand injector:
Sand injector is mainly used with hammer prototype to test sand compactness. After the sand is sieved into the sample tube, the sand can be loose and the performance of the prepared sand sample is uniform.
1.1 Screen specification: standard 6-mesh screen;
1.2 Inner diameter of funnel 200mm 120mm high;
1.3 The height from the screen to the mouth of the sample cylinder is 140mm;
SAC hammer tester+ sand injector measuring physical properties of cast sand (clay sand)
Used for the preparation of various standard samples and the determination of compactness required for the test of the physical properties of cast sand (clay sand).
Audited Supplier 
){kind=link}