Desktop Xenon Arc Lamp UV Test Chamber Aging Weather Aging Test Chamber

Product Description

Desktop Xenon Arc Lamp UV Test Chamber Aging UV Weather Aging Test Chamber
 

Table type xenon lamp aging test chamber
Application	Xenon lamp test chamber adopts xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves in different environments, which can provide the corresponding environmental simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test chamber can be used for selecting new materials, improving existing materials or evaluating the durability of changes in material composition. It can well simulate the changes of materials exposed to sunlight under different environmental conditions.
Product feature	Full spectrum xenon lamp. Test chamber air temperature control system. Flat product rack for easy placement of products Xenon arc lamp originally imported from the United States. It is easy to install and easy to use and basically does not require routine maintenance. The service life of xenon arc tubes depends on the level of irradiance used, and the life of general tubes is 1600 hours. Easy tube replacement, long - lasting screening program to maintain the required spectrum of assurance. The latest air-cooled xenon lamp, to solve the problem of high failure rate of water-cooled xenon lamp cooling mode, convenient for users to replace the lamp tube; Simple and convenient maintenance
Desktop Xenon Arc Lamp UV Test Chamber Aging UV Weather Aging Test Chamber Technical specifications and parameters:
Inside idimensions w×d×h	W400*D320*H300
Dimensions W×d×h	About 1000*500*600mm
Temperature range	65~90ºC adjustable
Temperature fluctuation	±0.5ºC
Sample tray:	380*300mm
Glass window filter:	1 piece
Type of light source:	Imported air-cooled full-solar spectrum-long arc xenon lamp (average service life is about 1600 hours)
Spectral wavelength	290nm~800nm
Xenon lamp power:	1 piece,1800W (Life: 1600 hours)
Xenon lamp quantity:	1 piece
Heating power	1KW
Irradiance of light source:	290nm~800nm,100~550w/m2  optional 340NM/420NM/290NM/300NM
Distance between sample stand and lamp:	230~280mm
Irradiation area:	1200mm2 (400*300)
Blackboard temperature:	60~110ºC   ±3ºC
Wave length	290~800nm
Circuit control system:
Control system	The xenon lamp weather test chamber has a variety of loop program, blackboard temperature and test chamber air temperature to choose from, and used for programming to simulate different operating environments. Temperature by microcomputer automatic calculation, PID self-setting function, touch screen temperature controller control, easy to operate, fast. The time can be divided into total time and illumination time respectively. After the setting, the device will automatically run according to the program input. The light irradiance displays the current light irradiation intensity at any time. The equipment will automatically stop the test when abnormal occurs during the test or after the test is over.
Temperature controller	"TIMI" temperature controller imported from Korea
Accuracy	0.1ºC(Display Range)
Resolution:	±0.1ºC
Temperature sensing device:	PT100 platinum resistance temperature measuring body;
Control mode	Heat balance temperature and humidity regulation mode; All electrical appliances are high-end products
Temperature control	Adopt P. I. D+S.S.R system to coordinate with the channel control; With the function of automatic calculation, the temperature and humidity change conditions can be corrected immediately, so that the temperature and humidity control more accurate and stable.
Equipment use conditions:
1. Environment temperature:	5ºC~+28ºC(The average temperature within 24 hours is less than or equal to 28 ° C);
2. Environment humidity	≤85%;
3. Power requirement	AC  380( ±10%)V/50HZ   Three phase five wire system;
4. Fluorine production electrolytic cells	4.5KW.
Desktop Xenon Arc Lamp UV Test Chamber Aging UV Weather Aging Test Chamber Spare parts and technical data:
1. Provide spare parts (wearing parts) necessary for the safe, stable and reliable operation of the equipment during the warranty period.
2. Provide the qualification certificate, warranty card, operation and use manual of the equipment, manual of the main accessories delivered with the equipment, packing list, detail list of spare parts electrical schematic diagram, spare parts of wearing parts, and other relevant information required by the buyer for the correct use and maintenance of the equipment.
Product picture