ISO1183 Touch Screen Solid Densitometer Automatic Liquid Densitometer Oil Density Meter
Introduction
The LR-32035S touch screen solid densitometer is based on ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, HG4-1468, JIS K6268, ISO 2781, ISO 1183, GB/T208, GB/T5163, GB/T 1933, GB/T4196, GB/T4123, GB/T5586, JB/T7780 adopt the principle of aqua displacement method of Archmede.
Widely used in testing any irregular density greater than one or less rubber, plastic, wire and cable, food, composite materials, cosmetics, footwear, glass, precious metal hardware, plastic, wire and cable, auto parts, magnetic oxygen core, powder metallurgy, tiny fans, tires, etc. It can directly read the average weight, density, volume and percentage of solid, particulate, film and floating samples in air and water.
ISO1183 Touch Screen Solid Densitometer Automatic Liquid Densitometer Oil Density Meter
Technical parameters:
Model LR-32035S
Weighing range 0.005-320g
Density readability 0.001 g/cm3
ABS integrated injection molding, free choice of clamshell mode (magic measuring frame, free disassembly)
Range density > 1, < 1 can be tested
Any irregular solid, particle, floating body can be measured
The results showed density, volume, percentage of volume, average density, Min density value and Max density value
Principle of measurement Archimedes principle buoyancy method
The measurement time was about 5 seconds
Display 5 inch industrial touch screen
Water tank PC material integrated injection molding transparent water tank (Size: Length 15.3 × width 10.7 × height 8.0cm)
Parameter setting Water temperature setting, measuring solution density compensation setting, standard material density setting, standard volume setting
Data statistics automatically save 100 groups of density values, and automatically display average value, max value, min value according to the number of saved groups
Correction mode single point automatic correction, multi point automatic correction
Data interface standard RS-232 interface, can be customized USB interface
Optional accessories Densitometer thermal printer, multi-point calibration weight set, liquid density measuring assembly, label printer, wind proof and dust proof cover
Power supply voltage AC100V~240V 50HZ/60HZ
The length of the outer package is 42.5cm × 17.5cm × 32.5cm
ISO1183 Touch Screen Solid Densitometer Automatic Liquid Densitometer Oil Density Meter
Product selling point:
1.5 "touch screen operation, easy to operate, built-in guided test step prompts, simplify and speed up the operation process
2. Stmicroelectronics high-performance 32-bit ARM processor, processing power than traditional instruments 100 times faster running accuracy, high measurement accuracy. For your every measurement, escort.
3. Built-in large capacity rechargeable lithium battery, the same type of Tesla 18650 battery, independent battery protection circuit board, withstand pressure and fall
4. Germany imported HBM sensor 2uv resolution output, each factory equipment is strictly carried out 48 hours 40 degrees high temperature aging test, weighing stability, accurate density value
5. Solution compensation setting, using water as medium, can also use other liquid medium
6. Intelligent Pinyin Chinese input, standard RS232 printer interface, printing content can be edited freely. Support bill printing, label printing. Accurately record each of your measurements; Customize the print title and company information
7. Automatically save 100 groups of measurement data and carry out statistical analysis on the data. Dynamic deletion, statistical printing, export to U disk accurately and quickly record your every measurement data, free your tedious measurement work
Standard accessories: 1. host, 2. measuring water tank, 3. density testing support, 4. tweezers, 5.100G correction weight, 6. floating body parts a set, 7. particle parts a set, 8. a power transformer, 9. a manual certificate
ISO1183 Touch Screen Solid Densitometer Automatic Liquid Densitometer Oil Density Meter
Optional accessories:
1. Windproof and dustproof cover (optional);
2. Densitometer thermal printer
3. Multi-point calibration weight set
4. Liquid density measurement module
5. Label printer
Audited Supplier 
){kind=link}
){kind=link}