| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ISO 2137 ASTM D217 Grease Ten Thousand Times Shear Tester Testing Machine
Introduction
The A3080 grease tensile tester is used to make the sample work back and forth in the grease tester multiple times (usually 60 times, 10,000 times or 100,000 times) before determining the penetration of the grease. This is to facilitate the measurement of the extended working penetration or working penetration of the grease.
Adaptation standards
GB/T 269,ISO 2137,ASTM D217,FED-STD-791/313.3
Instrument features
1. This equipment mainly measures the load-bearing capacity of various lubricants (such as lubricating oil, grease and solid lubricating films): under the specified test conditions, it compares the test force that the lubricant can withstand before the oil film breaks, which is the OK value.
2. Measurable wear resistance of various metal and non-metal materials under sliding friction conditions: The wear resistance of the materials is evaluated by observing the changes in the weight and size of the test pieces before and after the test, the changes in the width of the wear marks on the test blocks, and the changes in the friction force during the test.
3. Calculate the friction coefficient of the material by measuring the friction force: This machine can directly measure the friction force between the ring blocks through a lever system. It can calculate the friction coefficient under different working conditions (such as load, linear speed, and lubrication conditions) by changing these parameters.
ISO 2137 ASTM D217 Grease Ten Thousand Times Shear Tester Testing Machine
Product Parameter
|
Parameter Category |
Specific Parameters |
|
Working cycles |
10 cycles ~ 999,900 cycles |
|
Number of work devices placed |
2 pieces |
|
Orifice plate specification |
3 circles with 51 holes (GB/T 269, ISO 2137, ASTM D217) or 6 circles with 270 holes (FED - STD - 791/313.3) |
|
Working speed |
60 ± 10 cycles per minute |
|
Alarm |
Buzzer alarm after reaching the set number of cycles |
|
Power supply |
AC 220V ± 5%, 50Hz ± 1Hz |
|
Rated power |
Approximately 600W |
|
Overall dimensions |
350mm×320mm×380mm |
|
Instrument weight |
31kg |
){kind=link}