Ceramic Brick Frost Resistance Tester Testing Device Ceramic Freeze-thaw Test Chamber ISO10545

• Customization: Available
• After-sales Service: online
• Warranty: 1 year
• Model NO.: LS-T389
• Weight: 0-100Kg
• Power Source: AC220V
• Number of automatic cycles: 10 times
• Sink temperature control range: 15-50ºC
• Power: 7.5kW
• Transport Package: Plywood Case
• Specification: 600× 300× 600 mm
• Trademark: langshuo
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Ceramic Brick Frost Resistance Tester Testing Device Ceramic Freeze-thaw Test Chamber ISO10545 

1.Product introduction

The instrument is suitable for measuring the frost resistance of ceramic tile special equipment, the instrument meets the requirements of GB/3810.12-2016 and ISO10545-12:1995 ceramic tile test method: Determination of frost resistance.

Product Parameters

Ceramic Brick Frost Resistance Tester Testing Device Ceramic Freeze-thaw Test Chamber ISO10545 
2. Product Parameter

the test area operating temperature adjustment range	-15centigrade - +15
test area	600×600×300 (mm)
temperature control accuracy	±1
test mode	according to the set number of tests automatically completed cycle.
power supply	220V ±10% 2.5kw;

2.Working conditions

ambient temperature	0 ~ 40 centigrade
power supply	220V, 50 HZ;
equipped with inlet water source, outlet pipe

 

Ceramic Brick Frost Resistance Tester Testing Device Ceramic Freeze-thaw Test Chamber ISO10545 

3.Instrument composition

The instrument consists of three parts: freezing test chamber, inlet and drainage system, temperature control and automatic control system.

The working principle of the instrument is designed and realized according to the requirements of GB/3810.12-2016 national standard.

Set the number of test cycles (100 times) for the electronic counter according to the test requirements. Put the sample into the test area and cover the cover. Refrigerate the test area to -5 centigrade  for 15 minutes, turn on the inlet pump to spray water on the sample to increase the test temperature to +5 centigrade, hold for 15 minutes, count the counter once, set the electronic counter according to the test requirements for the number of test cycles (100 times). Automatically according to the above cycle test, after the test alarm notice.

Configuration: including one LS-T389 mainframe, one stainless steel sample rack.

Detailed Photos