ASTM D2979 Loop Tack Tester Inverted Probe Initial Adhesion Test Machine for Adhesive Tape Protective Film Label

• After-sales Service: Online Support
• Warranty: 1year
• Max Diameter of Workpiece: No
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LS-502E
• Mass Scope of Workpiece: No
• Type: Inverted Probe Initial Adhesion Test Machine
• Maxcapacity: 10n
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: No
• Display: No
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Oil Cylinder Position: No
• Capacity: 10n
• Accuracy Level: Level 0.5
• Test Speed: Adjustable Within 1-800mm/Min
• Separation Speed: 500mm/Mir
• Transport Package: Plywood Box
• Trademark: langshuo
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200PCS/Month
• Package Size: 58.00cm * 62.00cm * 100.00cm
• Package Gross Weight: 120.000kg

Product Description

ASTM D2979 Loop Tack Tester Inverted Probe initial adhesion test machine for Adhesive tape protective film label
 

Product Description

 

Make a standard area metal probe contact with the adhesive with a load of 100 grams for 1 second, measure the force of the probe from the adhesive, and take the average of five times. The instrument is the product of the connection of electronic skills and mechanical transmission. It adopts electromechanical integration design and is mainly composed of force sensor, transmitter, microprocessor, load driving mechanism, computer and color inkjet printer.

Scope of application
It is suitable for the initial adhesive force test of the probe for adhesive tape, protective film, label and other products to judge the initial adhesive mark. Before the instrument came out, the initial adhesive force test was usually determined by the rolling ball method. The rolling ball method is a simple and low-cost test process, but the experimental results are not comparable with other types of initial adhesive tests. High viscosity adhesives do not always get good initial viscosity results. Due to the limitations of the initial viscosity determination by the rolling ball method, compared with the traditional rolling ball method (GB/T4852-2002), the test results were obtained
Needle initial adhesion tester It is easy to measure the viscosity of the pressure adhesive. Good repeatability of test data, avoiding temperature,
The influence of test conditions and human factors on test results.


Reference  standard
ASTM D2979-2001 Determination of adhesive pressing bond with an inverted probe machine

ASTM D2979 Loop Tack Tester Inverted Probe initial adhesion test machine for Adhesive tape protective film label
 

Product Parameters

 

Capacity	standard configuration10N
Accuracy level	Level 0.5
Contact velocity	24ipm/min(inch /min), 61cpm/min(cm /min)
Separation speed	500mm/mir
Test speed	Adjustable within 1-800mm/min
Probe size	Diameter 5mm(SUS#304)
Sample quantities	≥3
Control mode	computer control
Dimensions	About 430mm wide * 450mm deep * 730mm high
Power supply/power	220VAC±10%50Hz     /200W
Weight	About 35kg

Detailed Photos