Kgsl-82 Strong Current Generator Primary Current Injection Tester ISO9001

• After-sales Service: Online
• Warranty: 1 Year
• Type: Strong Current Generator
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Model NO.: KGSL-82
• Display: Digital
• Control: Manual Control
• Weight: 10
• Power Source: AC220V
• Transport Package: Plywood Cases
• Specification: 36*28*30CM
• Trademark: LONROY
• Origin: Guangdong
• HS Code: 9024800000
• Production Capacity: 200

Product Description

KGSL-82 Strong Current Generator Primary Current Injection Tester ISO9001

Product Introduction

KGSL-82 high current generator is the power, electrical industry in the commissioning of the need for high current site necessary equipment, used in power plants, transformer distribution stations, electrical manufacturers and scientific research institutes and other departments, belongs to the short-time or intermittent working system, with small size, light weight, easy to use and maintenance. Designed for switch temperature rise requirements. The successful development of the three-phase high current temperature rise device fills a domestic gap and effectively solves the problem that the three-phase current of various switches is difficult to balance for a long time. The three-phase high current temperature rise device has the advantages of simple connection, fast three-phase current balance and high cost performance. It can be widely used in high and low voltage switches, isolators and combined electrical appliances.

 

KGSL-82 Strong Current Generator Primary Current Injection Tester ISO9001

Product Characteristics
1, all kinds of switches, circuit breakers, current relay operation test
2, plate ammeter, clamp meter, current transformer calibration
3, movable structure, the current output size can be arbitrarily adjusted, the size of the current two-way measurement direct reading
4, can be customized according to user requirements of different specifications of current output.

 

KGSL-82 Strong Current Generator Primary Current Injection Tester ISO9001

Product Parameters

The capacity of the equipment is designed according to the 5-minute short-time working system. If it is used for intermittent working system, the flow time should be 2.5 minutes on and 10 minutes off for cooling. The intermittent test can be cycled according to this rule.

Model	Riser capacity   (kVA)	Riser capacity     (kVA)	supply voltage (V)	Power phase number		Note
KGSL-82-500A	3	2	220	1		unitary
KGSL-82-1000A	6	5	220	1		unitary
KGSL-82-1500A	9	7	220	1		unitary
KGSL-82-2000A	12	10	220 or 380	1	2	Integral or split
KGSL-82-2500A	15	10	380	1	2	Integral or split
KGSL-82-3000A	18	15	380		2	Integral or split
KGSL-82-4000A	24	20	380		2	split type
KGSL-82-5000A	30	28	380		2
KGSL-82-6000A	36	30	380		2	split type