| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 2000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
· TDLAS technology was adopted to prevent the measured gas from cross interference of background gas
· Ultra-low range measurement, multiple reflection chamber, low detection limit
· High temperature heat tracing throughout the gas flow path, and low adsorption materials and treatment process are adopted to effectively avoid NH3 condensation loss
· The suction measurement is not affected by dust, temperature and pressure fluctuations in the flue
· It is not limited by site installation conditions and is widely used
NH3 Content Tester Ammonia Air Quality Monitor Ammonia Gas Analyzer Device Ammonia Flow Meter
Features
· TDLAS technology was adopted to prevent the measured gas from cross interference of background gas
· Ultra-low range measurement, multiple reflection chamber, low detection limit
· High temperature heat tracing throughout the gas flow path, and low adsorption materials and treatment process are adopted to effectively avoid NH3 condensation loss
· The suction measurement is not affected by dust, temperature and pressure fluctuations in the flue
· It is not limited by site installation conditions and is widely used
NH3 Content Tester Ammonia Air Quality Monitor Ammonia Gas Analyzer Device Ammonia Flow Meter
Technical parameters
|
Measure component |
NH3 |
|
|
Measuring principle |
TDLAS |
|
|
Measuring range |
0~20ppm |
|
|
precision |
±2%F.S. |
|
|
repetitive |
±1%F.S. |
|
|
The resolution of the |
0.1ppm |
|
|
The response time |
T90≤15S |
|
|
Working parameters |
environment temperature |
(-20~ +50)ºC |
|
Working power |
220V AC,50Hz,800W |
|
|
Purge gas source |
(0.4~0.8)MPa compressed air |
|
|
Interface signal |
communication |
RS485,RS232 |
|
The output mode |
4-way 4-20mA output 8 relay output
|
){kind=link}