| Customization: | Available |
|---|---|
| After-sales Service: | online |
| Warranty: | 1 year |
|
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DJY engineering ceramic isostatic pressure automatic detection device meter tester price
1.Product introduction
Special testing equipment for automatic pressure testing on the side of finished engineering ceramics (porous ceramics). The pressurized medium is water, and the product is placed in the pressurized chamber (see picture). The isolation equipment between the chamber and the product consists of the liquid (hydraulic oil/water) pressurizing device part, the pressurized chamber frame (see picture) and It consists of control parts.
DJY engineering ceramic isostatic pressure automatic detection device meter tester price
2.Product parameters
| Maximum test pressure error |
0.1MPa |
| Inspection speed | 20 seconds/time (every 2 samples) |
DJY engineering ceramic isostatic pressure automatic detection device meter tester price
3. Functions of each component
1. Lifting bracket
(1) Lifting speed: (controllable)
(2) No shaking is allowed during the lifting process; (install guide rods)
(3) The lifting height of the lifting bracket can reach the top of the pressurized chamber.
2. Pressurized chamber
(1) The pressurized chamber can withstand a pressure of 5MPa without leaking;
(2) The pressurized cavity is replaced according to the outer diameter of the product.
3. Control panel
(1) Control the switch of the main power supply;
(2) The test pressure is set within the range of 0~10MPa;
(3) The pressure holding time can be set, ranging from (0 to 60) seconds; (the pressure holding time is adjustable from 0 to 999 minutes)
(4) Control the lifting and lowering of the lifting bracket;
(5) Control the start, stop and pressure relief of pressurization. (Can be controlled automatically or manually) (Select automatic control, press the up button, when the sample is loaded into the pressure chamber and pressed, turn on the pressure switch, and when the pressure reaches the specified pressure, start timing ( The time is adjustable), after the specified time, the pressure will be released automatically. When the pressure drops to normal pressure, the lifting bracket will start to descend, and protective measures will be installed. When the sample is not installed, the pressure switch cannot be activated to protect the polyurethane rubber. Penetrated by high-pressure water)
(6) Safety gratings are installed on both sides of the pillar. When there are hands operating, the lifting bracket cannot be started to protect personal safety.
){kind=link}