Microcomputer Controlled Automatic Pendulum Impact Testing Machine for Metal

• After-sales Service: Online
• Warranty: 1 Years
• Max Diameter of Workpiece: <500mm
• Type: Pendulum Impact Testing Machine for Metal
• Accuracy Grade: 1
• Control: Manual Control
• Model NO.: JBW-300Z
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Case
• Trademark: LONROY
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200pieces/Month

Product Description

 

Microcomputer controlled automatic Pendulum impact testing machine for metal
Pperformance description:
Jbw-300z impact test machine is used to measure the impact resistance of metal materials under dynamic load, so as to judge the quality of materials under dynamic load.
The machine for microcomputer control automatic feeding machine, operation is simple and high efficiency, Yang pendulum is, impact, electrical control, and can use the surplus energy of thrust sample after automatic Yang place ready for the next test, especially new do impact test impact test lab and a lot of metallurgy, machinery manufacturing and other industries.

Microcomputer controlled automatic Pendulum impact testing machine for metal
 Technical features
1. This machine is a microcomputer screen explicit automatic feeding impact testing machine, which is controlled by PC microcomputer. It can realize the microcomputer operation such as lifting pendulum, feeding, impact, measurement, operation, screen digital display and printing.The residual energy is used to automatically lift the pendulum after the impact sample.Especially in the continuous impact test laboratory and a large number of impact tests in metallurgy, machinery manufacturing and other industries can reflect its advantages.The computer can calculate and show the material shock absorption, pendulum Angle and test average value.Remote data transfer can also be implemented according to user needs.
2. The main engine of the test machine is a single-supported column structure, with cantilever type hanging swing mode and pendulum hammer type C;
3. The impact knife is installed and fixed with screw, which is easy to replace;
4. Simple beam support for the sample;
5. The host is equipped with safety protection pin and safety protection net;
6. Manual control box and computer control, complete the whole process of sampling, feeding, impact, automatic swing and re-impact test as instructed.
7. The test machine is in line with GB/ t3803-2002 "test of pendulum impact machine", and the impact test of metal materials is conducted according to GB/ t229-2007 "method of charpy pendulum impact test of metal materials".
u positioning system directly

Microcomputer controlled automatic Pendulum impact testing machine for metal
Sample feed positioning system
1. Take out the sample manually and put it in the impact position to start the impact. The whole process takes about 10 seconds.Moreover, manual rapid sample placement is often inaccurate, resulting in inaccurate test results.In the operation of unskilled, uncoordinated, but also easy to cause accidents.
2. In order to shorten the sample placement time and ensure the sample is placed in the middle to obtain more accurate impact test results, mechanical sample delivery and positioning are recommended as the standard.
3. The way we deliver orientation continuously explore and research, based on long-term practice and experiment, has the design manufacture many positioning, directly or indirectly through continuous test, improve and perfect, to gradually solve the deliver time is long, send sample tilt, the specimen does not reach the designated position, positioning is not accurate, stick not tight, positioning piece of block sample, rod back does not reach the designated position, high failure rate, directly or indirectly with the host not harmonious, and many other problems, eventually developed a mature technology, low failure rate, practical and reliable positioning, directly or indirectly took the lead in the industry of technological achievement.
4. The sample feeding positioning mechanism adopts pneumatic and end face positioning.There are two cylinders and three actions can be realized.Continuous linkage ensures that the sample is sent out quickly and accurately placed on the clamp mouth within the specified time, adjusted in place and compressed to achieve the impact state.
5. The sample sending device has high thrust, and the pattern can be sent out smoothly without sticking.Pneumatic positioning is accurate, reliable and rapid.
6. When making the 2.5mm hourly sample, considering the style for neutral, part of accessories (clamps and gaskets) should be added less.


Microcomputer controlled automatic Pendulum impact testing machine for metal
Technical Specification

No	Item	Unit		Specification
1.	Host machine
1	Impact energy	J		300J (The energy switch can be completed by replacing the pendulum)
2	Prelift Angle of pendulum	Degree		150°
3	Angle minimum resolution	Degree		0.1°
4	Impact speed	m/s		5.24m/s
5	Sample support span	mm		40mm
6	The radius of arc at the end of the sample support	mm		1~1.5mm
7	Bearing Angle of sample support	Degree		11°±1°
8	Impact blade radius	mm		2mm,8mm(It is easy to replace the blade without replacing the pendulum)
9	Angle of impact Blade	Degree		30°±1°
10	Impact blade thickness	mm		16mm
11	Minimum resolution	J		0.1J
2,	Automatic feeding device
1	Automatic feeding device	Sample delivery: pneumatic Positioning method: pneumatic		A maximum of 20 pcs u-shaped or v-shaped specimens can be installed at one time
3	Auxiliary system
1	computer		/	HP computer
2	Printer		/	HP inkjet printers
3	shield		/	Removable for easy access

 Microcomputer controlled automatic Pendulum impact testing machine for metal
Main equipment configuration:
1. Host 1;
2.150j and 300J pendulum hammers, one for each;
3. 1 motor (installed on the host);
1 set of style support;
5. One set of sample feeding cylinder;
6. One set of positioning cylinders;
1 air compressor;
8. Hexagon socket wrench S=12 (screw for clamp socket clamp) 1 piece;
9. One piece of support adjuster;
10. One sample centering device;  
11. 1 set of dismounter (for changing pendulum);
12. 4 sets of ground screw bolts;
13. Adjust 4 pieces of inclined iron;
14. 1 set of safety protection net;

Microcomputer controlled automatic Pendulum impact testing machine for metal
Description of measurement and control
1.HP branded computers
2. HP printer
3. Windows operating system is a working platform, with screen display and mouse operation.
4. The software supports multiple pendulums.
5. Record the impact strength, impact energy, etc., and calculate the maximum and minimum average value and standard deviation.
6. Automatic processing of experimental data and automatic measurement of swing period
7. The system parameters are all open, and the user level operators fully master the system core.
8. Perfect data analysis function, suitable for all kinds of complex data analysis.
9. Complete file operating system., test report documents, sample documents, etc.
10. The test data shall be stored in the form of ASC code, and any general business report and word processing software can be used for user side reprocessing of the test data
11. A single computer can meet the testing and control needs of multiple test machines through the configuration of boards such as AD, I/O, etc.
Support all kinds of commercial printers