DRJ-II metal thermal conductivity tester high temperature Thermal resistance test machine equipment

• Customization: Available
• After-sales Service: online
• Warranty: 1 year
• Model NO.: DRJ-II
• Specification: 300mm× 300mm× 100mm
• Trademark: langshuo
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

DRJ-II metal thermal conductivity tester high temperature Thermal resistance test machine equipment
1.Product introduction
DRX-III hot wire thermal conductivity tester using transient hot wire method, including cross line method and parallel line method, the main measurement of solid and powder material at different temperatures, thermal conductivity coefficient (thermal diffusivity) and specific heat capacity. It has the characteristics of high precision, high resolution and high reproducibility. Automatic measurement is carried out by computer control. It is widely used in research institutions, quality inspection, factories and mines and other departments to measure the thermal conductivity of materials. The instrument is developed and designed again on the basis of the original DRX-II in our factory, which improves the measurement accuracy and reproducibility, the structure is more reasonable and the use is more convenient. DRX-III mainly increases the cross hot wire method (also can be used in parallel line method to measure the material below 25w/m.k) instrument reference standard: GB/5990 "fixed heat insulation refractory product thermal conductivity test method (hot wire method)"; GB/T17106 "Refractory thermal conductivity test method (parallel line method)"; GB 11205 "Determination of rubber thermal conductivity (transient hot wire method)"; GB/T10297 "Determination of thermal conductivity of non-metallic solid materials (hot-wire method)", etc

Product Parameters

DRJ-II metal thermal conductivity tester high temperature Thermal resistance test machine equipment
2. Product Parameter

 

thermal conductivity test range	1.0 ~ 500W/m.K
accuracy	better than 3%
power supply	220V, 50HZ
sample size requirements	rod sample: Ф3 ~ 5×220(mm) Filament sample: Ф1 ~ 3×20-45(mm)

Test the experimental temperature under controllable state, and the maximum temperature of The electric furnace is 1350ºC
The heating power can be adjusted ±1%.
Vacuum and protective atmosphere can be filled.
To achieve computer automatic testing, automatic temperature control, to achieve data printing output

Detailed Photos