| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Glove impermeability tester, Impermeability test machine for glove
Meet the standard:
GB 24787-2009 Single Use non-sterilized rubber surgical gloves
Glove impermeability tester, Impermeability test machine for glove
Device:
|
Cylindrical cylinder |
Minimum diameter 60 mm, length sufficient to hold gloves on and 1000 mL of water preferably transparent. |
|
Water filling device |
Filling with water will keep the gloves vertical.As shown in Figure A2 3 cylindrical measuring cup A capacity of at least 1000 mL, or any other device capable of transferring 1000 mL of water at a time |
| step | Secure the glove to the cylindrical sheet with a suitable device, such as an O-ring, so that the glove does not exceed the circular sheet by 40 mm.Pour 1000 mL of 50 mL not more than 36 C of water into the device to wipe away any spills on the gloves.If the water does not rise to 40 mm from the sleeve edge, lift the hand so that the entire hand is filled with water 40 m from the mouth.Pay immediate attention to any obvious leaks.If the gloves do not leak immediately, observe them for another 2 to 4 minutes.The leakage within 40 mm from the sleeve edge can be ignored for easy observation and dyed with water-soluble dyes |
){kind=link}