| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fiber slicer,Harrington's microtome,Fiber slice of stainless steel bottom plate
Introduction:
This instrument is suitable for textile, fiber industry departments, scientific research units to cut fiber or yarn into very small cross-section thin slice, through the microscope to observe its morphological structure.
Fiber slicer,Harrington's microtome,Fiber slice of stainless steel bottom plate
The working principle of the instrument:
The structure diagram of the instrument is shown in the following figure: The instrument consists of two 1.6mm thick stainless steel bottom plates to form the left and right bottom plates of the slicer. On the right bottom plate, there is a 0.8mm wide inlay groove, which is combined with the plug plate on the left bottom plate to push the sample tightly.The levelling frame is centered on the pillar of the levelling frame, and can be rotated when the levelling knife lifts the positioning nail when the inlay groove is removed. There is a levelling knife above the sample, and the levelling screw can be adjusted to control the thickness of the sample sticking out of the bottom plate.Use a blade to cut the sample under the bottom plate.
Fiber slicer,Harrington's microtome,Fiber slice of stainless steel bottom plate
Main technical index:
| Section area | 3×0.8mm |
| Minimum section thickness | 20μm |
| volume | 82mm×27mm×25mm |
| Weight | 0.5Kg |
 |
){kind=link}