| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
EN60335 Figure 16 Probe 41 Test Cone
Product Description:
1. According to : IEC335, IEC61032 probe 41 EN60335
2. This probe is intended to verify the protection against access to glowing heating elements.
Spectifications:
|
Test Rod Diameter |
30 mm |
|
Rigid Finger Length |
80 mm |
|
Handle Diameter |
50mm |
|
Handle Length |
80mm |
|
Reference |
IEC61032 |
Application:
1.The joint parts of the test finger cannot touch the live parts or hazardous parts, and the 50mm-20mm Baffle Plate cannot enter.
2.In the test requirements of preventing from approaching to the hazardous parts, the probe B test probe needs to with a 10±3N thrust. The product without force should be used with push-pull dynamometers.
3.In the test of against electric shock, wiring ,configuration and power and indicating device are needed. Turn on the power of the tested sample, and exert the corresponding force to determine whether the grounding line are connected (3 inserts).
4.Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance
This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger.
Tolerance on dimensions when no specific tolerance is given:
- on angles: 0−10°
- on linear dimensions: up to 25 mm: 0− 0,05 mm; over 25 mm: ± 0,2 mm.
){kind=link}