PRM8/20 80KA Impulse Current Generator Electrostatic Generator IEC61000-4-5 for Test the Impact Current Resistance
Product Overview:
PRM8/20 80KA impulse current generator is used as the impact square wave current source for the flow capacity test of nonlinear resistor piece. It is mainly used to test the ability of nonlinear resistor piece to withstand the long-term impulse current under the condition of overvoltage. Intelligent test equipment specially designed for 8/20 impulse current test with maximum peak value of 15KA and below, stable performance and reliable quality. In line with IEC61000-4-5/IEC 61643-1, GB18802.1, UL1449, YD-T1235[1].2, TB/T 3074 and other related lightning surge test standards, can be used for MOV, TVS, GDT, SPD and other surge protection devices test.
PRM8/20 80KA Impulse Current Generator Electrostatic Generator IEC61000-4-5 for Test the Impact Current Resistance
Product features:
1.Integrated design, easy to operate, good safety
2.Use program controlled high voltage power supply, easy to set, good reliability
3.Built-in a variety of custom Settings, easy to use
4.Output current polarity, can automatically alternate positive and negative
5.Built-in software protection, no need to operate in a fixed order
6.Built-in single coupling/decoupling network section online test
7.Can be very convenient to upgrade the product
PRM8/20 80KA Impulse Current Generator Electrostatic Generator IEC61000-4-5 for Test the Impact Current Resistance
Parameters |
PRM8/20 80KA customizable |
output waveform |
8/20μs |
electrical polarity |
Positive/negative, alternating between positive and negative |
surge current |
0~80KA |
rock frequency
|
1-9999C |
charging time |
20~999 second |
interval |
20-999S,step-by-step 1S |
network |
Built-in single phase three wire coupled decoupling network 20A |
device power supply |
AC220V±10% 50/60Hz |
size |
550×700×1300mm |
eight |
100kg |