Kgyhm Laser Salt Density Machine Insulator Ash Dust Gray Density Tester ISO9001

• After-sales Service: Online
• Warranty: 1 Year
• Type: Laser Salt Density Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Model NO.: KGYHM
• Display: Digital
• Control: Manual Control
• Weight: 5.5
• Power Source: AC220V
• Transport Package: Plywood Cases
• Specification: 41*32*22CM
• Trademark: LONROY
• Origin: Guangdong
• HS Code: 9024800000
• Production Capacity: 200

Product Description

KGYHM Laser Salt Density Machine Insulator Ash Dust Gray Density Tester ISO9001
Introduction

KGYHM laser salt density ash density tester uses a new detection technology to combine the ash density test and salt density test into one, which can detect the ash density and salt density of the tested insulator at the same time, simplifying the process of insulator pollution detection, and is very suitable for use in inspection sites and laboratories.

 

KGYHM Laser Salt Density Machine Insulator Ash Dust Gray Density Tester ISO9001

Product Parameters
1, built-in test container and precision electrode, salt dense gray dense integrated test, the test process is completed in one time;
2, touch screen operation, intuitive and fast human-computer interaction interface, flexible setting of test parameters, embedded operating system, 64-bit floating point operation;
3, automatic integrated test device, accurate measurement of water injection, multiple automatic stirring and signal collection, after the test is completed, please empty the test liquid in the container;
4, portable design, easy to field test or laboratory use;
5, the use of laser frequency transmission principle, to achieve gray density direct test, without filtering, drying weighing;
6, intelligent data analysis, multiple output modes of test results, including direct reading test results, printing reports, directly exporting test results to U disk through USB interface;
7, the instrument comes with a micro printer, directly print the test results.

 

KGYHM Laser Salt Density Machine Insulator Ash Dust Gray Density Tester ISO9001

Product Parameters

measuring range	salt deposit density	0.01~5.00 mg/cm2
	Gray density	0.01~5.00 mg/cm2
	temperature	0~100ºC
	conductivity	0~100000 us/cm
measurement accuracy	salt deposit density	The resolution is 0.01 bits and the full scale accuracy is better than ± 1%
	Gray density	The resolution is 0.01 bits and the full scale accuracy is better than ± 2%
	temperature	Resolution 0.1 bit, accuracy better than ±0.5ºC
	conductivity	The resolution is 1/1000 of the electrode range used, and the full-scale accuracy is better than ± 1%
Message output mode	touch screen	1280×600 Touch screen, to achieve good human-machine information interaction
	printer	The microprinter prints the measurement results directly
	U S B	Export measurement data in USB disk mode
service conditions	service conditions	AC:220V±10% DC:12.2V / 22Ah lithium battery
	environment temperature	0~+50ºC
	relative humidity	≤85%RH
relative humidity	environment temperature	-10~+55ºC
	relative humidity	≤85%RH
apparent parameter	volume	405mm×318mm×215mm
	weight	about 5.5 kg