| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Anbai AT2511 DC Low Resistance Tester/Micro Ohm Meter 10micro ohm-200k
Brief Introduction
AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ - 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.
Anbai AT2511 DC Low Resistance Tester/Micro Ohm Meter 10micro ohm-200k
Technical Parameter
| SPECIFICATIONS | |||
|
AT2511 |
AT511C (discontinued) |
||
| Parameter |
DC resistance |
||
| Basic Accuracy | 0.2% | 0.3% | |
| Measurement Range | 10μΩ~200.0kW | 0.1mW~50.00kW | |
| Signal Source | I - Max: < 100mA | ||
| Range | Automatic and manual with 8 ranges | Automatic and manual with 6 ranges | |
| Speed | Slow: 3 times/second; Fast: 10 times/second | ||
| Result Display | Show | ||
| Max Reading | 5000 | ||
| Adjustment | Short-circuit Zero-Adjust for each range | ||
| Comparator | OFF, PASS, HIGH, LOW | None | |
| Beep | OK, NG, OFF | None | |
| Test Lead | 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section | ||
| Others | LED display | ||
| Applications |
Small diameter coil (headset coil); resistance of sensor; Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection |
||
| GENERAL FEATURES | |||
| Power Supply | Voltage: 198V AC - 240V AC. Frequency: 50Hz. Power: Max 15VA. Optional 110VAC | ||
| Size | 220mm (Width)x85mm (Height)x259mm (Depth), 2kg | ||
| ORDERING INFORMATION | |||
| Accessory |
ATL503: Kelvin test leads AC power cord |
||
){kind=link}