| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
16 CFR 1500.48 ASTM F963 4.8 EN-71 Sharp Point Tester
Sharp point tester is used to detect the toy can reach the position of whether there is a danger of sharp point safety.Toy safety test project;Requirements for technical parameters are consistent across countries.
standard
16 CFR 1500.48 ASTM F963 4.8 EN-71 Sharp Point Tester
| The United States: | 16 CFR 1500.48 / ASTM F963 4.8 |
| volume | 112 * 16 * 16 mm |
| The weight | 80g |
| The attachment | |
| 1 pound of weight |
The European Union"EN - 71, 1998, 8.14
China A. GB6675-2003 5.9
16 CFR 1500.48 ASTM F963 4.8 EN-71 Sharp Point Tester
Cusp tester, cusp tester test procedures:
1. Adjustment procedure of cusp tester
1.1. Release the locking ring by clockwise rotation.
1.2. Rotate the test cap clockwise until the red indicator is on.
1.3 slowly turn the test cap counterclockwise until the indicator light is off.
1.4. Turn the test cap forward/backward to determine the exact position when the indicator is just on.
1.5. The scale marks marked by the reference lock ring shall be aligned with one of the scale marks of the test cap.
1.6. Rotate the 5-grid scale line of the test cap counterclockwise (the distance between the two short lines on the cap is one grid).
1.7. Twist the locking ring until it is close to the tail cover.
2. Cusp test program
Place the tip into the measuring slot of the cusp tester, hold the test object and apply a force of 4.5n to check whether the lamp will be on.If the cusp tester is free to be perpendicular and no external force is applied, the external force applied by the measured object is 4.5n (1LBS).
3. Judgment: if the lamp is on, the measured object is unqualified product, that is, the sharp point.
){kind=link}