KDHX-880 10KV35KV intelligent wireless high and low voltage nuclear phase meter/machine/instrument
Product characteristics
1. It consists of two independent systems: one host, one general collector X and one general collector Y, one special collector A and one collector B (a total of four collectors), and two 3.2m insulated rods.
2, sealed ring cabinet low voltage induction point and remote line high voltage induction point nuclear phase
3, satellite timing remote nuclear phase can be used for outdoor, indoor, basement nuclear phase
4, with intelligent voice prompts the host and collector various working status
5. Voice automatically guides the nuclear phase operation process
6, the host can display the voltage level of the measured points of each collector
7, can be applied to a variety of trolley switchgear nuclear phase;
KDHX-880 10KV35KV intelligent wireless high and low voltage nuclear phase meter/machine/instrument
phase difference accuracy
Near nuclear phase: error ≤3°
Remote nuclear phase -- Precision mode: error ≤3°
Remote nuclear phase -- timing mode: error ≤6°
frequency accuracy
±0.1Hz.
the wireless transmission distance of the transmitter and the receiving host is greater than 100 meters.
GPS satellite timing remote nuclear phase distance between hosts A and B ≥500km.
The result judgment adopts A-level standard. Phase difference ≥30° is out of phase; Phase difference 30° is in phase.
the machine can continue to work for 30 minutes without GPS signal.
the instrument to achieve cross-voltage level measurement, one instrument can measure each voltage level line.
It has the function of high voltage checking and checking phase sequence.
can be used for switch cabinet live display nuclear phase.
data storage capacity of 800 groups, can be checked and single deletion.
The standard insulation rod length is 3 meters, and the applicable voltage level of the insulation rod is ≤220KV.
leakage current during high voltage measurement <10uA.
transmitter power consumption < 0.1W, power consumption of receiving host<; 0.3W.
Both transmitters and receivers have built-in rechargeable lithium batteries. The host lithium battery capacity is about 2200mAH, and the transmitter battery capacity is about 350mAH.