| After-sales Service: | Online |
|---|---|
| Warranty: | 1 Year |
| Type: | Varistor Tester |
| Transport Package: | Plywood Case |
| Trademark: | LANGSHUO |
| Origin: | China |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Varistor tester/thyristor Voltammetry characteristic detector/Trigger characteristics off time tester
Overview:
The voltammetry characteristic of thyristor is the basic characteristic of thyristor, which directly affects the normal use of the device in the whole machine. Therefore, it is very important to measure the volt-ampere characteristics of thyristors during the production, distribution and use of thyristor devices.
We developed the DB-025 thyristor voltammetry characteristic tester, the test method conforms to the national standard JB/T7624-94 "Rectifier diode test Method" and JB/T7626-94 "reverse block triode thyristor test method", the circuit design is simple and concise, the MCU control, the oscilloscope can directly watch the voltammetry characteristic curve. The test parameters are displayed by the digital panel table, automatic protection of excess leakage current, automatic reset, automatic voltage regulation of the high voltage supply circuit, and the output high voltage is not affected by the fluctuation of the grid. The instrument has the characteristics of small volume, light weight, simple operation, accurate test, reliable protection, convenient maintenance, etc. It can test various thyristors (KP, KK, KA, KS) and thyristor modules of VDSM, VRSM, VDRM, VRRM, IDSM, IRSM, IDRM, IRRM and various rectifier diodes (ZP, ZK) of VRSM, VRRM, IRSM, IRRM and other parameters. It is a testing equipment for testing the volt-ampere characteristic parameters of thyristor and rectifier device manufacturers, distributors and whole machine factories.
During the use of the thyristor, due to the influence of many factors such as overcurrent, overvoltage, overheating, its voltammetry characteristics will gradually deteriorate, and even can not maintain normal use or damage, so in the maintenance, the used components and components to be newly installed after testing to confirm the good performance of the machine, as soon as possible to eliminate equipment failure is very good.
Varistor tester/thyristor Voltammetry characteristic detector/Trigger characteristics off time tester
| Peak voltage measurement range | 0-6000V |
| Peak leakage current measurement range | 0-2000UA |
| Peak leakage current protection setting range | 0-1980UA |
| The oscilloscope in the machine can watch the dynamic peak voltage and peak leakage current changing volt-ampere characteristic curve waveform | |
| Working environment | No more than 2000 meters above sea level |
| Ambient temperature | 0 ~ 40ºC |
| Relative humidity | Relative humidity |
| No conductive and explosive dust | |
| No gases or vapors that corrode metal and destroy insulation | |
| No severe vibration and shock | |
| Measurement accuracy | ±5% |
| Power consumption | AC220V ±10% 50Hz, less than 150VA |
| Overall dimensions | 200×400×360mm |
| Weight | about 8Kg |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}