| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
E40 7006-53-1 Anti-accidental electric shock gauge
E40 lamp holder and holder gauge technical standard: GB 1483.1-2008; IEC 60061-3:2004
The plunger of the gauge is shown in the test position. When the plunger is at rest, surface W shall be retracted deeper than surface V.
| Reference | Dimension(mm) | Tolerance(mm) | Reference | Dimension | Tolerance |
| D | 39.6 | +0.0/-0.02 | P | 21 | ±0.1 |
| F | 40.2 | +0.05/-0.0 | Q | 32 | ±0.1 |
| G | 44 | +0.05/-0.0 | R | Approx.25 | |
| H | 22 | ±0.1 | U | 12 | ±0.1 |
| M | 50.4 | ±0.1 | r | 4.5 | +0.5/-0.0 |
| N | 51.4 | +0.0/-0.02 | α | 35° | ±30' |
E40 7006-53-1 Anti-accidental electric shock gauge
Purpose:
To check protection against accidental contact during insertion of caps E27 on finished lamps.
E40 7006-53-1 Anti-accidental electric shock gauge
Testing :
The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
E40 7006-53-1 Anti-accidental electric shock gauge
Purpose:
To check protection against accidental contact during insertion of caps E27 on finished lamps.
E40 7006-53-1 Anti-accidental electric shock gauge
Testing :
The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
){kind=link}