Lr-A001-D Mfi Plastic Melt Flow Index Test Equipment Fully Automatic Melt Flow Index Tester with Mfr Mvr Test

• Customization: Available
• After-sales Service: Online Support
• Warranty: 1year
• Model NO.: LR-A001-D
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Melt Flow Indexer
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Touch Screen
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: No
• Model: Lr-A001-D
• Standard: ISO1133 ASTM D1238
• Temperature Range: Room Temperature~450degree Centigrade
• Temperature Fluctuation: ±0.2 ºC
• Test Methods: Mfr+Mvr Methods
• Transport Package: Plywood Box
• Trademark: lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200PCS/Month

Product Description

LR-A001-D MFI plastic melt flow index test equipment fully automatic melt flow index tester with MFR MVR test
1.Product introduction:
This tester for high precision automatic melt flow rate instrument, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production,Plastic products, petrochemical and other industries and related institutions, scientific research units and commodity inspection departments.
LR-A001-D MFI plastic melt flow index test equipment fully automatic melt flow index tester with MFR MVR test
2.Test standard:

GB/T3682-2018	Measurement of melt flow rate and melt volume flow rate of thermoplastic plastics
ISO 1133:2011	Determination of mass flow rate MFR and melt volume flow rate MVR of thermoplastic melt
ASTM D1238-13	Standard test method for flow rate determination of thermoplastic melt by extruded plasticimeter

3.Product advantage:

1. Ø more paragraphs (2) temperature control method, two groups of platinum resistance sensor, two heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
2. Ø resolution temperature was 0.1 ºC, the temperature uniformity of 0.2 ºC, the temperature fluctuation of not more than 0.5 ºC within 24 hours, the displacement sensor resolution is 0.001 mm.
3. Thermal protection device
4. Ø hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)
5. Ø test can choose quality standard, or volume method, two test methods or simultaneously, and can melt density is calculated.Both methods are tested when the piston rod moves to a certain position.
6. Ø stable internal temperature alarm prompts, and an increase of 240 seconds (GB3682 regulations) material preheat second countdown, after the end of the countdown, issued a prompt, can also set the American standard (ASTM) preheating time, etc.
7. Ø built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
8. Built - in mini printer for easy printing test data
9. Ø high precision touch screen controller, 7 inch touch screen, can be stored and print test conditions and data recently, test print menu Settings include test time (the default) system, operating personnel, material name, test method, test conditions (temperature, weight weight, blanking interval) data, test results, test results, the artificial judgement OK or NG, etc.,
10. Ø reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
11. Ø need weight load, are installed in screen equipment to choose corresponding weight and loading that no user manual loading or bolt type selection, reduce the workload.Test completion self - rising.

Test Methods:MFR +MVR Methods
Display Mode:English color touch screen display
LR-A001-D MFI plastic melt flow index test equipment fully automatic melt flow index tester with MFR MVR test
 

1. Technical Speicification

Model	LR-A001-D
Barrel parameters	Inner hole 9.550±0.005mm   length 163mm
Pistons head  parameters	Piston head:  9.474±0.005mm
Piston rod diameter	8.94mm
Mold length	8.000±0.025mm
Mold nominal inner diameter	2.0955±0.0051mm
Half die length	4.000±0.025mm
Half die nominal inner diameter	1.050±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature range	Room Temperature~500degree centigrade
Temperature fluctuation	±0.2 ºC
Temperature uniformity	±1ºC
Temperature display resolution	0.1ºC
Display resolution	0.1ºC
Maximum comsuption	< 600W
Time display resolution	0.1s
Weight parameters are as follows:
Weight accuracy	±0.5%
Basic configuration	A    0.325kg
	B    1.2kg
	C    2.16kg
	D    3.8kg
	E     5kg
	F     10kg
	G    12.5kg
	H     21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min.
Material be installed	1 min.
Material sample temperature recovery time	4 min.
When binder set	1min
Output mode	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Power	AC220V±10%   50/60HZ